#173065  by Darkstar860
Hi there folks.

I need to rewire my Wolf, but my wolf doesnt have the stratoboost. Mine has an OBEL, so its kinda like the Tiger but with a single coil in the neck. I didnt know if anyone had a schematic for the updated Wolf that Jerry used.

Thanks :-)
 #173066  by Darkstar860
Also what would the schematic look like if you were to not add an OBEL ? Is there anything special you would need to do with the wiring or is it basic wiring ? Im trying to figure out a few different approaches to this. Im not using the OBEL in any of my guitars and I dont plan to. But I want to make sure if i take the OBEL out im not messing up anything other than the OBEL and the tone of the guitar will not be effected. Thanks

-Walt B
 #173067  by Jon S.
 #173068  by Darkstar860
Would I wire the preamp I have the same way is that Stratoblaster ? The preamp I have is like the Tiger preamp. Thanks for the link :-)

I figured out how to remove the OBEL while keeping the preamp and im never gonna use the OBEL again, so that makes it cleaner inside the guitar right off the bat.

Just making sure the Stratoboost and the preamp can be wired the same way, cause im kinda doing the tiger thing with a single coil in the neck.

Also ive never heard of whats on the tiger, its a AM-MOD Pot Linear 250k/500k.

On that diagram in that link where the .02uf are, theres one thats .022f w/ ???. What is that ? Is it just another .02uf ?

I think I got most of this, but im gonna def ask the knowledgeable folks here before I start assuming hehe. ;-)

 #173069  by Darkstar860
The wiring to that 5 way on that link is hard for me to see. Hmm I think thats pretty much gonna be the only thing I cant see well enough on that to do. Theres some zip zag going on there and I cant tell haha.
 #173070  by Darkstar860
Would anyone be willing to make me a wiring hardness ? I dont need the OBEL part and I already have the preamp. I already have the pickups.

I would just need the switches, pots, resistors etc wired. Then all id need to do is wire pickups, battery, and preamp. Lemmi know if anyone would be willing to make me one, id buy 2 actually.

I cant solder worth a damn with my right hand (Have no nerves in my right fingers after an accident years ago, makes little things like this very complicated. Why I have to use Gorilla Snot when playing is because I cant feel the pick in my fingers).

Id be dropping the harnesses into 2 Wolf guitars setup the same exact way. H-H-S and same layout as Jerrys wolf etc. Any help would be greatly appreciated :-)