[rkubik]

Just picked up a used Colorsound Wah off Ebay and it is in need of a little repair mechanical repair. Unfortunately, I am having a tough time finding a source for some parts. Does anyone have a good source for pedal parts such chassis parts, etc. Electronics are working fine so no issue there but it defeats the purpose when I have to adjust the pot by hand. Any help would be apprecaited.

Thanks

[hogan]

mouser
digi-key
allied
Small bear
effects connection
pedal parts plus

[WilliamC]

Since you've got working electronics, you can skip the first three dealers hogan listed (they're all commercial electronics distributors). The last three are possibilities. Small Bear and PPP have a specific section of their stock lists for wah parts:

http://www.smallbearelec.com/Categories ... +Inductors
http://www.pedalpartsplus.com/mm5/merch ... y_Code=WAH

If you don't see what you need at Small Bear or PPP the path of least resistance might be to first search and then post on a couple of the DIY fora like:

http://www.diystompboxes.com/smfforum/
http://freestompboxes.org/index.php
(here too)

You'll want to snap clear, closeups of the bits that are hosed up to post along with your questions.

Good Luck!

[tigerstrat]

mechanical parts have got to be the toughest.

Might have luck taking your device to a small, service-oriented hardware store and asking for advice.

[rkubik]

Thanks for all those who responded. This helps me out greatly.