#64118  by zezozeceglutz
 
You're stuck fishing the pots through the f-hole. Luckily, it appears to be pretty wide open compared to a ES335 or something similar. The smaller body should also make it easier.

Take off the knob, remove the nut holding the pot in place, , push it into the body, and start feeling around in the f-holes for wires that may connect to it. It's a pain every time but as for getting it back in, you can tie a piece of string around the threaded part of the pot after removing the nut and before dropping it into the body. This lets you just pull it back into the hole it came from when reassembling.