Hello does anyone have a clone setup for their MIDI I see all of this gear is available for pretty reasonable prices. As I am building a clone rack I was just thinking maybe Ill go with the MIDI setup too. Lets hear some thoughts thanks!
AFA my setup, it is fairly the same as what Garcia used way back when.
Yes, I know about all the technology improvements since then but never
bothered to sink more $ than I originally had done.
Most of the info found here regarding Garcia's MIDI setup was donated by me:
http://dozin.com/jers/jers/guitars/rosebud/rosebud.html
Likewise, I am using a Roland GR-50 unit for pitch to MIDI conversion.
Feel free to ask my why I picked this unit.
I take the MIDI OUT of the GR-50 and feed it into a Korg M1R (upgraded to
a T series synth). I use the Lake Butler footcontroller in conjunction with
the 2 synths.
I have an Ibanez Strat copy that has the externally mounted GK-2 controller unit.
My tiger guitar has same, but gutted - where the electronics are inside the guitar
cavity. The MIDI volume pot and up/down patch switches along with the hexaphonic
pickup are mounted on the top of the guitar. Original retro-fitting was performed
by SF's Gary Brawer a long time ago. I made some mods to his work to satisfy my
needs.
Oh, wait. I did finally buy a Brian Moore iGuitar:
http://www.iguitar.com/iguitar/iGuitarM ... uitar91.13
Some of the feature included are:
- 13pin RMC system for fast tracking access to Roland and compatible 13pin guitar processors
- No need for externally mounted synth pickup.
- Improved tracking over externally mounted magnetic hex pickups.
I hope this is some of what you are looking for. Feel free to ask me more questions, -BlackJack

