Sell and buy at your own risk...
 #102779  by 1960strat
 
Hi all, parting ways with my Warmoth Tiger guitar. Guitar is what i am told (and confirmed by Laytonco) the first Warmoth WGD produced. Apparently Dan from CO did the drawings and approached Warmoth about doing the guitar and they used those drawings as the basis of the WGD production.

The is in very good shape and plays beautifully. It has the Cutler preamp in it and 3 Super Twos. The pickups are split coil by push-pull pots on the tone knobs. Volume pot is new in the last 3 months. There is a minor scuff on the headstock. Please see the pics. Not a dent, not a crack, a paint scuff.

I am looking for $1200.00 for the guitar. I wouldnt sell it but i am in the market for a moriarty wolf.

http://www.flickr.com/photos/66998962@N04/

I also am looking to sell:

GCX + Ground Control Unit: $600
M-Audio Profire 2626 Interface: $350
AKG C414B XLII: Brand new: $600
Last edited by 1960strat on Fri Sep 02, 2011 2:47 pm, edited 1 time in total.
 #102900  by willmusic
 
I'm slowly (but not so slowly!) making my way towards that price range and have actually been looking at components for a warmoth tiger. This would certainly beat having to source all the parts then assembling/wiring! When I get there I'll hit you up to see if you still have it. But for your sake I hope someone bites sooner than later. Good luck!
 #103001  by 1960strat
 
barefootdave wrote:What's the difference between the Cutler preamp and the Waldo buffer?

Does that refer to John Cutler?
I have to admit that there are alot of people on this board much more knowledgeable on that than i am. I honestly dont know the differences.
 #103002  by Tennessee Jedi
 
barefootdave wrote:What's the difference between the Cutler preamp and the Waldo buffer?

Does that refer to John Cutler?
Try the search feature
This subject has been brought up before many times
:-)
 #103033  by barefootdave
 
Thanks Jedi, after doing some reading, it appears that the Cutler preamp doesn't add a lot of value, probably better off just getting a few Waldo buffers for my various guitars if I am going to go further in trying to get a "Jerrier" tone...
 #103039  by 1960strat
 
barefootdave wrote:Thanks Jedi, after doing some reading, it appears that the Cutler preamp doesn't add a lot of value, probably better off just getting a few Waldo buffers for my various guitars if I am going to go further in trying to get a "Jerrier" tone...
I wouldnt say it adds no value. None of my other guitars have pre-amps in them and this guitar drives my Qtron more smoothly than any of my other guitars and in middle pick up single coil it has a very Jerry tone.
 #103087  by 1960strat
 
barefootdave wrote:What kind of wood is the top?
The body is swamp ash and the top is Indian Rosewood. It has a maple neck and an ebony fretboard.