Page 1 of 1

Stage dimensions

PostPosted:Fri Jul 23, 2010 1:42 pm
by jdsmodulus
Do we know the actual stage dimensions from say 1989? I was thinking placement of gear, racks, and most important drums? Even if I knew mic placement say from Phil to Brent? I can kinda guess from pics but it would be cool if we had the floor plan. Thanks

Re: Stage dimensions

PostPosted:Fri Jul 23, 2010 1:50 pm
by Rusty the Scoob
Didn't they have Healy pads by then? If bleed is what you're asking about...

Re: Stage dimensions

PostPosted:Fri Jul 23, 2010 3:26 pm
by jdsmodulus
yeah they had the pads, I was just wondering about the actual pacement of everything in terms of feet. Drum risers etc

Re: Stage dimensions

PostPosted:Fri Jul 23, 2010 7:40 pm
by tigerstrat
jdsmodulus wrote:yeah they had the pads, I was just wondering about the actual pacement of everything in terms of feet. Drum risers etc
Several years back, I made a 3DSMax model of the 1974 Wall of Sound , with approximated stage layout. Off the top of my head, iirc it was around 57 ft between Jerry and Keith's side fill stacks. Been thinking of making a whole series of models showing the stage changes through the years, adding and changing as knowledge becomes available... but eh, when will I have the time?

If you have a photo from a good (or no) angle, with clear lines of sight, you can use the width of one 12" JBL to try to approximate widths and heights in feet.... depth might be a little tougher.

Re: Stage dimensions

PostPosted:Sat Jul 24, 2010 2:24 am
by jdsmodulus
thanks Tiger for that... we worked it out, we have a big room so it took some work but tonight sounded good. :cool: