Page 1 of 1
Alligator specs...
PostPosted:Fri Nov 20, 2020 8:12 am
by zkinard
Is there a post on the board that already discusses the technical specs of Jerry's Alligator or a website where the specs can be viewed? Wondering about all the details--tuners, bridge, nut width, neck radius, etc. Thanks all.
Re: Alligator specs...
PostPosted:Fri Nov 20, 2020 8:41 am
by wleeds
Waldo - Mike Wald - he's had his hands in there
Re: Alligator specs...
PostPosted:Fri Nov 20, 2020 9:12 am
by brianb
Thankfully Waldo re-published a good portion of his research.
http://waldotronics.com/alligator.html
Re: Alligator specs...
PostPosted:Fri Nov 20, 2020 1:26 pm
by wleeds
brianb wrote: ↑Fri Nov 20, 2020 9:12 am
Thankfully Waldo re-published a good portion of his research. http://waldotronics.com/alligator.html
Waldo has it going on!
Re: Alligator specs...
PostPosted:Fri Nov 20, 2020 1:29 pm
by lbpesq
An excellent research tool. I consulted it often during my current Alligator build which I hope to complete this weekend!
Bill, tgo
Re: Alligator specs...
PostPosted:Fri Nov 20, 2020 4:34 pm
by rugger
wleeds wrote: ↑Fri Nov 20, 2020 8:41 am
Waldo - Mike Wald - he's had his hands in there
Mike, along with Andrew Olsen and one other person, got their hands on Tiger at the Rock n' Roll HOF. I don't believe Alligator was part of the experience.
john in san diego
Re: Alligator specs...
PostPosted:Sat Nov 21, 2020 10:36 am
by TI4-1009
brianb wrote: ↑Fri Nov 20, 2020 9:12 am
Thankfully Waldo re-published a good portion of his research. http://waldotronics.com/alligator.html
Thanks for the tip Brian. Delighted to see that Mike has opened up his treasure trove again.