Page 1 of 1
New Wolf build
PostPosted:Thu May 31, 2018 12:37 pm
by bluemule
Been awhile since I posted a new build. This one turned out great and its breaking in nicely. It has the Kluson harmonica bridge and tailpiece. In past builds I have used wraparound bridges. The wraparound bridges have solid fundamentals and thicker overall tone. The Kluson in comparison is brighter and more expressive. I cheated on the electronics a little (usually build my own board) and used a Wald TPC with the adjustable gain. Awesome product/tone and wouldn't hesitate to order another.
https://www.facebook.com/media/set/?set ... 574&type=1
https://postimg.cc/gallery/25vct97dy/
Re: New Wolf build
PostPosted:Thu May 31, 2018 1:06 pm
by tcsned
Looks awesome! I really like the headstock!
Re: New Wolf build
PostPosted:Thu May 31, 2018 4:52 pm
by tdcrjeff
That's a lot of switches!
Re: New Wolf build
PostPosted:Thu May 31, 2018 10:19 pm
by bluemule
Thanks for the comments all.
tcsned. I wanted straight string pull which helps with tuning stability and that's how it kind of evolved.
tdcrjeff. They are really straight forward when you get used to them. I have also built using a 5-way which is good for really fast pickup selection, but I miss out on having the ability to have any pickup on. Here's how I have it laid out.
Mini toggle closest to neck= TPC on no loop/ TPC on with loop/ Passive
The next top three are on/off for each pup
The bottom three are series/split/parallel for each pup
The last switch turns the Stratoblaster on and off
The top pot is master volume. Next is neck tone and then middle/bridge tone. Last pot is the blaster gain.