Wolph upgrade clips
PostPosted:Tue Feb 24, 2015 11:50 am
Just finished this Wolph makeover for Jeff... it had the later HHS setup (not great pups) with a Wald UGB clone... Replaced the nut, which was very poorly cut, gave it a good fret leveling and re-crown. We decided to go with the early Wolf idea instead and changed it to 3 IO custom wound single-coils, and added an IO Blaster and IO Booster/Buffer. (I don't know what happened with the resolution of the pics... apologies)
Clips recorded on Zoom HN4; '67 Champ, Real Tube Reverb, JBL D120s.
Guitar Volume 7.5; Tone all at 10; each section cycles through all 3 pups
0:00 to 1:10 Passive
1:10 to 2:25 Blaster
2:25 to 3:20 Booster/Buffer
3:20 to 4:50 Blaster and Booster/Buffer
4:50 to 6:00 Blaster set to 9, Booster/Buffer at 2, overdriving input of 2nd stage
6:00 - End Both Blaster and Booster/Buffer on and set to 3
Clips recorded on Zoom HN4; '67 Champ, Real Tube Reverb, JBL D120s.
Guitar Volume 7.5; Tone all at 10; each section cycles through all 3 pups
0:00 to 1:10 Passive
1:10 to 2:25 Blaster
2:25 to 3:20 Booster/Buffer
3:20 to 4:50 Blaster and Booster/Buffer
4:50 to 6:00 Blaster set to 9, Booster/Buffer at 2, overdriving input of 2nd stage
6:00 - End Both Blaster and Booster/Buffer on and set to 3