Page 1 of 1

Tiger Wiring- Photoschematic

PostPosted:Tue Apr 08, 2014 1:50 pm
by TI4-1009
With the recent wiring talk I thought these might be useful.

I searched for the post that had these in them but can't locate it- it was 2-3 years ago. Great for the "wiring diagram impaired", I found them really helpful when I wired my Tiger. I think there was one error- two wires reversed on the ganged pot- the ground should go to 29c, not 27c? So that when you turned the knob one pot goes up and the other down. Other than that great stuff. Thanks again to whoever did this!

Image

Image

And giving proper credit I'm pretty sure these are based off Waldo's wiring diagram.

Re: Tiger Wiring- Photoschematic

PostPosted:Tue Apr 29, 2014 1:13 pm
by jmfranc
That was me. And it was a reworking of Waldo's which I found hard to follow. And yes - you caught my error on that one.

Re: Tiger Wiring- Photoschematic

PostPosted:Tue Apr 29, 2014 1:49 pm
by TI4-1009
Thanks again- nice job! I used it again when wiring my Wolfish.

Re: Tiger Wiring- Photoschematic

PostPosted:Wed Jun 04, 2014 12:48 pm
by jmfranc
Here's the corrected layouts:

Image

Image

Re: Tiger Wiring- Photoschematic

PostPosted:Tue Jul 12, 2016 1:26 pm
by Customvibrations
In this diagram the negative to the battery is going to the tip. Am I right that on both jacks, the ring and the tip wires are crossed?

Re: Tiger Wiring- Photoschematic

PostPosted:Tue Jul 12, 2016 1:31 pm
by Customvibrations
How does the switch work if all the wires are going to one side? It seems you could only use one pickup at a time and not get the neck+middle abd bridge+middle together.

Re: Tiger Wiring- Photoschematic

PostPosted:Wed Jul 13, 2016 4:24 am
by hippieguy1954
The diagrams are correct and if you follow them exactly, you will have no problems.

Knowing how the 5 way switch works is cool. This should help. :smile: http://www.premierguitar.com/articles/T ... ch_Part_II

Re: Tiger Wiring- Photoschematic

PostPosted:Wed Jul 13, 2016 7:18 pm
by TI4-1009
Yup. I've done two builds using this diagram and they worked just fine.