Page 1 of 1
Adamas Picks Too Bright?
PostPosted:Sun Mar 03, 2013 6:07 pm
by mkaufman
I really like the Adamas pick, however, as a Bobby player, I'm wondering if there's a similar pick which may be less bright. I'm finding that as I sweep, sometimes the higher strings can sound too bright.
I need brightness to give me that glassy Weir sound, but not too much on the high end.
tnx,
mk
Re: Adamas Picks Too Bright?
PostPosted:Mon Mar 04, 2013 6:03 am
by Sparechaynge
Can you lower the pole pieces on the treble side of you pickup(s)? I play lots of Bob-style stuff with my Telefunken (close enough) and ran into the same thing. I adjusted the pickup on my Esquire and it sounds fine now.
If you can't/won't or it just doesn't suit you, perhaps try a Gator Grip, Stubby, or Tortex pick. They are *similar* to the Adamas, but certainly way less bright.
Re: Adamas Picks Too Bright?
PostPosted:Mon Mar 04, 2013 7:15 am
by Rusty the Scoob
Gator Grip 2.0mm is exactly what you describe - feels and plays like an Adamas (minus the raised lettering), lacks that high end "click" to the tone.
Re: Adamas Picks Too Bright?
PostPosted:Mon Mar 04, 2013 8:12 am
by Sparechaynge
Although, for 100% accuracy maybe you WANT it to be crazy bright....

Re: Adamas Picks Too Bright?
PostPosted:Mon Mar 04, 2013 8:49 am
by mkaufman
Nah - I'm after the 70's tone.
mk
Re: Adamas Picks Too Bright?
PostPosted:Mon Mar 04, 2013 5:05 pm
by Sparechaynge
Ha, yeah I kind of figured. Definitely try lowering the poles first since it won't cost you any money. I have been using a Jazz III XL for a while for Bobby stuff, it's easier to hold due to it's slightly larger size (in between that of a regular Jazz and a traditional Fender pick) and has better definition than the nylon Jazz varieties. YMMV
Re: Adamas Picks Too Bright?
PostPosted:Mon Mar 04, 2013 6:03 pm
by mkaufman
The pickups don't have adjustable poles. I'm gonna try the Gator Grips and see what happens.
Thanks,
mk
Re: Adamas Picks Too Bright?
PostPosted:Mon Mar 04, 2013 6:16 pm
by gmchart
You could still try the pick-up mounting screws. Tilt the whole pup away from the strings a bit on the treble side. Just did this this week on my guitar. When I've got the compression set where I think I want it, hitting the high strings was a little too harsh. Helped a bit we'll see.