Grateful Dead Music Forum

Electrically challenged geezer building guitar #2

First one turned out well (main stage axe) and #2 will be looking at Waldo buffer and OBEL
It will have the Super II in the middle, and some other tones ... Area 58 in neck and a filtertron in the bridge.

Any suggestions for someone to hook up with?

Thanks, ALL


Griz

You can do it! As long as you can post photos, you have a lot of help right here.

Use Waldo's site! All the info you need is there and if you need any other help, just ask!

send me a pm I can porbably help I'm outa golden. kinda busy but lets talk. I've done few of these on my guitars. Greg.....

I'm in Laramie, and I'd be happy to help too, if you can't find anyone closer.

Brian

Thanks, Gentlemen !

I figured there might be somebody reasonably close.
May be a little ways off, and was checking my options.
Most techs are not familiar with OBEL and buffer stuff.

Griz

Griz- If I did it you can do it. With the waldo diagrams, the wiring photos posted here:

forum/viewtopic.php?f=426&t=7985

and a good 45 watt soldering iron, it's do-able.