Page 1 of 2
Tiger Wiring
PostPosted:Fri Jul 29, 2011 4:17 pm
by mgbills
Good Afternoon Folks,
I'm in the process of wiring two Strat's ...Tiger style. In looking at Waldo's diagram, it appears that the pickup leads for each pickup & their respective tone caps all get soldered to the same switch post? Am I seeing things? Should they be wired in the standard 6 positions?
Please help. It's a sunny Friday, and instead of lounging about drinking Sierra Summerfest, I'm in my show soldering like a MadMan!
Thanks to All.
M
Re: Tiger Wiring
PostPosted:Fri Jul 29, 2011 4:41 pm
by TI4-1009
mgbills wrote: Am I seeing things?
Yes.
Re: Tiger Wiring
PostPosted:Fri Jul 29, 2011 4:53 pm
by mgbills
Thanks. That is if you are confirming that all leads go to one side of the switch. Thanks, also if you are confirming that I"m seeing things...although those things may mean different things.

Re: Tiger Wiring
PostPosted:Fri Jul 29, 2011 4:54 pm
by mgbills
Now...I see in retrospect that you have confirmed that I'm seeing things. So the wiring question stands. Sorry for creating confusion.
Re: Tiger Wiring
PostPosted:Sat Jul 30, 2011 5:42 am
by hippieguy1954
mgbills wrote:Now...I see in retrospect that you have confirmed that I'm seeing things. So the wiring question stands. Sorry for creating confusion.
I'm going to be doing the "Tiger" wiring (3 super 2's, buffer, OBEL, 5 way selector switch) in a couple of weeks. If you don't have it done by then, we could get together here or if your not too far away, in person. Where are you located?
Waldo's diagram is correct and I thank him for that. It is just that there is a lot going on there and you really have to look carefully and realy study it. Is this the diagram your looking at?
http://www.wald-electronics.com/tiger.html If so, make it bigger and you can easily see where the wires go on the selector switch. Also, here is a good diagram that just shows and explains the OBEL.
http://guitarwiring.blogspot.com/2011/0 ... ntrol.html

Re: Tiger Wiring
PostPosted:Sat Jul 30, 2011 9:45 am
by TI4-1009
Look on page two in the
Guitar Building and Mods section for a thread something like
"Help- Tiger wiring with images.." These images are a big help.
Pickup only wiring:
http://img203.imageshack.us/img203/7080 ... gsmall.jpg
All other wiring:
http://img294.imageshack.us/i/wiringnop ... llwid.jpg/
Re: Tiger Wiring
PostPosted:Sat Jul 30, 2011 9:56 am
by hippieguy1954
Re: Tiger Wiring
PostPosted:Sat Jul 30, 2011 8:27 pm
by TI4-1009
As far as I know there are only the three mini switches- two coil cuts and the one OBEL on/bypass.
Re: Tiger Wiring
PostPosted:Sun Jul 31, 2011 6:05 am
by hippieguy1954
Re: Tiger Wiring
PostPosted:Sun Jul 31, 2011 12:33 pm
by TI4-1009
The four switches are all shown in the first image- the pickup selector top left, and the three mini-switches down the left side. Where are you seeing another switch?
Re: Tiger Wiring
PostPosted:Sun Jul 31, 2011 3:42 pm
by hippieguy1954
Re: Tiger Wiring
PostPosted:Sun Jul 31, 2011 7:09 pm
by TI4-1009
Top pot is the master volume, middle pot is tone for middle pickup, lower pot is ganged 250/500 tone pot for neck single coil and bridge humbucker.
Re: Tiger Wiring
PostPosted:Mon Aug 01, 2011 4:00 am
by hippieguy1954
TI4-1009 wrote:Top pot is the master volume, middle pot is tone for middle pickup, lower pot is ganged 250/500 tone pot for neck single coil and bridge humbucker.
Got it! That is what I thought. What threw me off was that the master volumn is illustrated differently than the other two pots.
Thanks T14-1009!

Re: Tiger Wiring
PostPosted:Mon Aug 01, 2011 5:28 am
by hippieguy1954
Re: Tiger Wiring
PostPosted:Mon Sep 19, 2011 12:02 pm
by foolofships
I was looking there for a Rosebud wiring diagram (on that site) for some comparisons and didn't find one. Do you know if there is one there?
Not sure if there's a diagram on there, but as far as I understand, the difference between Rosebud's and Tiger's wiring is that in Tiger, the volume and tone pots are post-effects, and in Rosebud the tone controls are pre-effects and the volume is post-effects.