Grateful Dead Music Forum

Indeed, it's beginning to sound like you should bring your guitar to an experienced pro tech for an overall review. Sometimes a bit more $$ spent up front = less total $$ spent in the end.

Where do you live (perhaps we can offer tech recommendations)?

Straight edge tool I'm using is notched as sits on frets 2-21. I've been resting it in the center of the fretboard when making this measurement.

I live in York, PA

Do you have a go-to local tech in the York area? If not, I can ask around for you.

I don't. Have used a few places over the years w/ mixed results. Open to any recommendations. Would be nice to find someone reliable.

Thanks all.

Rats, I used to live in Elizabethtown!

Usually the straightedge has "a straight edge". If it's lying on the fretboard and not the frets it doesn't take into account fret height (which is what the string "sees".) If you don't have a real straightedge try the string method mentioned above- and putting a capo at the first fret makes it easier (you need one less hand).

Jumping in late. But when you think of a neck, you need to think all parts:
- neck is proper with frets, spacing, distance, lengths, crowns/heights, etc
- nut height and slots and angle
- proper neck angle
- proper bridge heights
- then intonation
(Fret buzz should be good if all those are good.)

That's the science! Now you need the art which talks playability and those are all the minor tweaks that come with years of experience. And what you do when situations present. Player technique. Action. Etc. Talk to a good tech about how he setups up differently by player. If they only have 1 goto, which too many do, walk.