PaulReed69 wrote: ↑Mon Aug 21, 2023 3:03 am Yes. I will be running the 3x12 with it, any recommendation of amps that can take a 2.67ohm load? Thanks!Most of the professional audio amps can handle 2 ohm and 4 ohm loads which means they are safe for 2.67 as well. The budget Monoprice linked above is rated for 250 w per side into a 2 ohm load. It cannot be run in bridged mono mode into 2 ohms, but you could run it off of one side, or wire the cab to be a 2x12 at 4 ohms and 1x12 at 8 ohms, and use the volume controls on the stereo power amp to balance them.
Also, this assumes 3x 8ohm speakers and not the 16 ohm versions.
