I was wondering if you can use a Roland GR33 floor control unit with a guitar set up for a GR 55. The cables fit both units.
Anybody try this?
Anybody try this?
Winterland wrote:I have a Phiga wolf with the Midi inside. The cable goes from the guitar jack to the controller. It came with a GR55 but no power. I have an older GR33 that was used with another guitar. I took the GR33 and plugged the cable from the Wolf to the GR33. The cable is the same pin out? It does not work. I was wondering if they are not compatible. Does that make sense?Hmmm - I think I'm still missing something. I think Phil uses the Graphtech Ghost midi system, I have that on my Warmoth. Is the cable the 13 pin Roland cable that plugs into the GK input? Or are you plugging something else in?
Winterland wrote:Not the pick ups. I have a GR33 and the pick up is shot. I wanted to plug it into my guitar with the on board midi set up. The guitar is set up for the GR55.I used the midi cable from the guitar and plugged it into the GR33. I got loud feedback but can hear some midi effects? Don't see why it wouldn't work. It must be because of the pickups or something?How is your GR-33 connected to your amp? You should be using a mono 1/4" cable from the R (Mono) MIX OUT jack.
tcsned wrote:Phil, as in Lesh? I thought he gave up on midi basses.
I think Phil uses the Graphtech Ghost midi system
Sparechaynge wrote:No, Phil Gawen, the Phiga guitar guy.tcsned wrote:Phil, as in Lesh? I thought he gave up on midi basses.
I think Phil uses the Graphtech Ghost midi system