rukind.com

Grateful Dead Music Forum

A place to talk about the music of the Grateful Dead 

Chat about Equipment Info
 #6404  by BlobWeird
 Fri Jun 16, 2006 12:05 pm
I bought some pickups off ebay. Humbucker fat strat and humbucker Bullet and i dont know if they are neck or bridge or middle. Will this matter when i hook it up? like am i gonna fry somethin or is the sound just gonna be messed up>?

 #6406  by strumminsix
 Fri Jun 16, 2006 12:31 pm
If you install them correctly, the worst that will happen will be unsatisfactory tone.

Usually, people install a hotter pickup in the bridge since there is less string movement you need something a bit stronger.

If I were you, I'd check the specs and start there.

 #6407  by FretfulDave
 Fri Jun 16, 2006 12:35 pm
I put classic pickups in my Strat a couple years ago and even though the pickups were pre-wired together, I had to do the volume and tone controls and the five position switch. I got the switch done pretty much backwards. That did not fry anything, but the controls did not work right and the sound was not right. If your pickups are not wired together, then getting the phasing right (I hope that is the right term) is important to get good sound.

Dave

 #6408  by BlobWeird
 Fri Jun 16, 2006 1:49 pm
Well i started workin on it and my biggest problem now seems to be gettin everything to lay right. That of course isnt anything you guys can help with its just gettin everything goin the right way and all that jazz but thanks for the input. And yeah i put the fat strat in the bridge so it should be alright. I think i might just buy a whole new volume/tone pot or whatever you call it

 #6410  by BlobWeird
 Fri Jun 16, 2006 2:22 pm
Nice site waldo thanks. Another question Would anyone happen to know where i can buy a whole new pot system for a squier? I guess it wouldnt necessarily have to be for a squier but a strat in general? I know i could buy individual pots but i realllly dont wanna go through the wiring process.
 #16446  by Stellar Blues
 Fri May 18, 2007 9:42 am
I'm currently upgrading a Squier Bronco bass with a
Seymour Duncan vintage rails pickup, to hopefully change that boat anchor into a sweet-sounding instrument.

Just figured out the humbucker wiring for the new volume pot., so I let you all know how it sounds (with new strings) after the surgery is complete.

I'm kind of hoping for a sound that as good as wedding night sex.... :lol: