So I am thinking about finally tapping the preamp on my fender pro reverb... for a few reasons other than the SS power amp. On waldo's site the post alembic mod is listed as having a nice amount of other uses. Those include- using the normal channel with the internal power amp and also being able to use the vibrato channel (or vice versa) with an external power amp simultaneously... HALF REVERB HALF CLEAN! that sounds like serious fun... and the tonal differences of the channels, especially with the tone stack differences... it also says you can use the jacks with a stereo Y cable as an effects loop! that's something I personally would love to have... I love running delay after the preamp, even if its a clean preamp it really does add some clarity to teh repeats that allows you to turn the mix down and keep everything from getting muddy. but how awesome does it sound to be able to use a tube power amp (fender stock) and an SS power amp, with reverb on one channel and slightly different tone on both? different cabs too! that's waht jerry did in the early 70's right? had 3 twins and on one he used both channels for 1 channel with no reverb and 3 channels with... then at another point he used half and half?
So... my concerns are the fact that its not buffered. Wouldnt that be a problem if I used a longer cable for the fx loop, or even a long cable to my external power amp? Has anyone done these mods? I'd love to hear some experiences!
Weber has a kit (and schematic) for a tube buffered effects loop that looks pretty easy to me to install... it also includes the ability to put pots to control the send and return level's seperately... and the ability to run a lineout with adjustable send level without interupting flow to the power amp. plus being tube buffered you dont have to worry about cable length.
Anyone at all used the jerry post alembic preamp taps as an effects loop or used both preamp channels- one to external power amp and one to internal power amp?
Any knowledge would be greatly appreciated before I just do the mod and find out about a quirk i wasnt planning on!
Thanks!
So... my concerns are the fact that its not buffered. Wouldnt that be a problem if I used a longer cable for the fx loop, or even a long cable to my external power amp? Has anyone done these mods? I'd love to hear some experiences!
Weber has a kit (and schematic) for a tube buffered effects loop that looks pretty easy to me to install... it also includes the ability to put pots to control the send and return level's seperately... and the ability to run a lineout with adjustable send level without interupting flow to the power amp. plus being tube buffered you dont have to worry about cable length.
Anyone at all used the jerry post alembic preamp taps as an effects loop or used both preamp channels- one to external power amp and one to internal power amp?
Any knowledge would be greatly appreciated before I just do the mod and find out about a quirk i wasnt planning on!
Thanks!