rukind.com

Grateful Dead Music Forum

A place to talk about the music of the Grateful Dead 

 #110399  by Griz
 Fri Mar 02, 2012 6:33 pm
Electrically challenged geezer building guitar #2

First one turned out well (main stage axe) and #2 will be looking at Waldo buffer and OBEL
It will have the Super II in the middle, and some other tones ... Area 58 in neck and a filtertron in the bridge.

Any suggestions for someone to hook up with?

Thanks, ALL


Griz
 #110401  by TI4-1009
 Fri Mar 02, 2012 7:42 pm
You can do it! As long as you can post photos, you have a lot of help right here.
 #110408  by hippieguy1954
 Sat Mar 03, 2012 4:54 am
Use Waldo's site! All the info you need is there and if you need any other help, just ask! :smile: :smile: :smile:
 #110418  by gpilcher2001
 Sat Mar 03, 2012 9:01 am
send me a pm I can porbably help I'm outa golden. kinda busy but lets talk. I've done few of these on my guitars. Greg.....
 #110424  by Griz
 Sat Mar 03, 2012 11:26 am
Thanks, Gentlemen !

I figured there might be somebody reasonably close.
May be a little ways off, and was checking my options.
Most techs are not familiar with OBEL and buffer stuff.

Griz
 #110451  by TI4-1009
 Sat Mar 03, 2012 8:11 pm
Griz- If I did it you can do it. With the waldo diagrams, the wiring photos posted here:

forum/viewtopic.php?f=426&t=7985

and a good 45 watt soldering iron, it's do-able.