rukind.com

Grateful Dead Music Forum

A place to talk about the music of the Grateful Dead 

 #102772  by Friesman
 Tue Aug 30, 2011 10:39 am
How important is this? Am I missing the boat by not changing from resurrection standard wiring to actual tiger wiring?

tx,
friesman
 #102781  by myoung6923
 Tue Aug 30, 2011 5:59 pm
I'm not sure if they are all wired the same way - but mine had one spague orange drop capacitor .047 shared between both tone pots. I'm not completely sure how this would affect the tone - but I think that if you were using 2 pickups at the same time that you would lose tone range.

Anyhow, I changed that around as well as moving around the tone pot positions so that the tone control for the middle pickup was the closest one since it's the one that I would use the most. I think something else was wonky but I don't remember exactly what...
 #102789  by hippieguy1954
 Wed Aug 31, 2011 3:01 am
If I was going to spend the money on a resurrection, I'd make sure it came wired the way I wanted it, be it tiger or whatever. If ya want tiger wiring, ask for it!
:smile: :smile: :smile: