ccw3432 wrote:I wouldn't give up on this yet. See my post above. If I was correct there, your problem is isolated to a very small segment between the switch and the OBEL jack (assuming your TRS cord, junction box, and everything post OBEL jack is functioning) . It could be as simple as your OBEL jack grounding out on the shielding paint you put in. Pull the jack, double check the wiring and plug the guitar into it while it is removed from the guitar body. See if you get sound.
The tip of the OBEL jack is the "Send" which will have sound with a mono cable, and so will the Output jack. However, when the Output jack is used the volume pot will work. Not so with the OBEL jack because it is placed before the volume pot and since the Tip/Send is tapped before it explains why the volume pot would not work. But he only has sound in what appears to be the OBEL jack because the volume pot does nothing. And the Output jack does nothing. What is confusing to me is the fact that the volume pot does not work in either jack with just a mono cable, but works when he hooks it all up to a junction box.gr8fl4295 wrote:Correct.waldo041 wrote:OBEL Jack = Switch has sound on one side and No sound on the other side. Volume pot does nothing.
Output Jack to amp = Switch has No sound on both sides of the switch. Volume Pot does nothing.
Last edited by waldo041 on Wed Oct 23, 2013 8:09 pm, edited 2 times in total.
Disclaimer: I only make, modify or build things for those that seek what i may be able to provide.