Page 1 of 1
Where shoold i place my compressor/sustainer?
PostPosted:Tue Dec 11, 2007 2:27 pm
by spacehead333
I just got a boss compressor/sustainer, and i was needing some advice as where to place it. I use a boss super overdirve, mxr distortion +, and phase shifter, a boss autowah, a dd-6. and a cry baby. Im just wondering how i should fit it in. Thanks
PostPosted:Tue Dec 11, 2007 5:39 pm
by tigerstrat
Place right after the signal path...
PostPosted:Tue Dec 11, 2007 6:01 pm
by bucketorain
i place mine in this order:
guitar > enevelope filter > octave > od > distortion > COMPRESSOR SUSTAINER > eq > (modulations) > AMP
PostPosted:Tue Dec 11, 2007 6:32 pm
by wisedyes
Generally, the compressor should go first in line; that is, right after the guitar.
PostPosted:Tue Dec 11, 2007 6:34 pm
by Laytonco
I was looking on this site and gearheads because I've seen an explanation before. I use mine at the beginning of my chain and the reason I did that is I got advice to do that. But, try every which way and see what YOU like best. Then do it that way!
Peace,
Gil
PostPosted:Tue Dec 11, 2007 6:48 pm
by strumminsix
IMO, after your filters but before your OD.
PostPosted:Tue Dec 11, 2007 8:24 pm
by High Peaks
Before i got the GCX ,I started running my Comp after the filter. Then i tried it before my envelope filter and found that it helped the filter from just blotting out on certain notes.( sorry for blotting, can't think of a better word right now)
Then i realized it was the settings on my filter. When i adjusted them, the compressor would just squash any dynamics to the filter. So, all that being said-- If you have touble controlling the dynamics of your filter, put it first. If you don't, put it right after. Before the OD.
This is just my humble opinion.
PostPosted:Tue Dec 11, 2007 8:30 pm
by strumminsix
High Peaks wrote:Before i got the GCX ,I started running my Comp after the filter. Then i tried it before my envelope filter and found that it helped the filter from just blotting out on certain notes.( sorry for blotting, can't think of a better word right now)
Then i realized it was the settings on my filter. When i adjusted them, the compressor would just squash any dynamics to the filter. So, all that being said-- If you have touble controlling the dynamics of your filter, put it first. If you don't, put it right after. Before the OD.
This is just my humble opinion.
Well said and agreed. Or you could say...
If you use a compressor as a compensator put it before your filter
PostPosted:Tue Dec 11, 2007 10:24 pm
by shakedown_04092
tigerstrat wrote:Place right after the signal path...
PostPosted:Wed Dec 12, 2007 9:16 am
by High Peaks
If you use a compressor as a compensator put it before your filter
Exactly,lol!!!
It just took my a small essay to say that.
PostPosted:Fri Dec 14, 2007 12:11 pm
by bucketorain
this may be a silly question, as i have a boss compression sustainer, i get what sustain is, but what does the compression part do? to me, compression sounds bad...as MP3's are bad because they are compressed versions of the original signal.
PostPosted:Fri Dec 14, 2007 3:01 pm
by strumminsix
bucketorain wrote:this may be a silly question, as i have a boss compression sustainer, i get what sustain is, but what does the compression part do? to me, compression sounds bad...as MP3's are bad because they are compressed versions of the original signal.
A compressor evens out levels. bring ups the soft brings down the peaks.
Are you a math dude? If so think of a graphed line and remove the standard deviation.
Want it super simple - makes your volume consistent.
However it sucks out dynamics.