strumminsix wrote:I think last time I did this it was about $150 and that included a setup!!
What guitar are you thinking of and what pickups does it have in it?
From your list I think most would work less: comp, chorus
Well I had been looking at the Ibanez Prestige S5470.

Reason being my hands are not big paws and the neck thickness "C" is a little thinner the the standard 21mm at the same spot. The thinner neck (depth wise) helps me reach and play cords better.
NECK DIMENSIONS
Scale/Length 648mm/25.5"
a: Width at Nut 43mm
b: Width Last Fret 58mm
c: Thickness 1st Fret 17mm
d: Thickness 12th Fret 19mm
Radius 430mm
PICKUPS
Bridge Pickup Name: Hot Grinder 2
Model No: HGD2
Construction: Humbucking
Magnet: Ceramic
Description: Hot, but sharp enough to hear the pick bite the strings.
Middle Pickup Name: Short Tracer
Model No: ST2
Construction: Single Coil
Magnet: Neodymium
Description: Alnico magnet provides full output in low profile setting.
Neck Pickup Name: Hot Grinder 1
Model No: HGD1
Construction: Humbucking
Magnet: Alnico
Description: Hot, but sharp enough to hear the pick bite the strings