Reasonable 2x12 cab?

Reasonable 2x12 cab?

Postby lunasparks » Sun Oct 24, 2010 5:59 pm

See link below. These seem pretty reasonably priced, but I know nothing about good vs. bad cabs. I have a couple of JBL K120s looking for a home and thought this looked interesting. For those in the know, does this look like something fit for my decidedly non-touring home office/studio?

http://rover.ebay.com/rover/1/711-53200 ... =824&kw=lg
User avatar
lunasparks
Billy
Billy
 
Posts: 238
Joined: Fri Oct 30, 2009 6:55 pm

Re: Reasonable 2x12 cab?

Postby JonnyBoy » Sun Oct 24, 2010 6:15 pm

Those would work very well if you don't care about the look and exact measurements of Jerr's cabs. The 3/4 pine can bow or split if you don't finish them well, plywood is composite laminate so it doesn't warp and split as easy. For home and light gigging those sound ideal. I made a 1x12 cab out of some 3/4 roofing ply and it is one of the best cabs I have ever played through. It is light, sturdy and if it does break it cost under $30 to make. I would go for the box that looks good for the best price, they are all boxes ya know. Unless looking just like Jerry is something you crave in your presentation..
http://otislotus.net/ Finally finished our new site...
User avatar
JonnyBoy
Senior Member
 
Posts: 2134
Joined: Mon Mar 01, 2010 8:35 am
Location: the south swamps

Re: Reasonable 2x12 cab?

Postby lunasparks » Sun Oct 24, 2010 6:23 pm

JB - so I would need to finish it with stain or tung oil (or something) in order to guard against problems? Not that this is problem for me, just clueless and want to confirm I'm understanding correctly. Full disclosure: I have basically no woodworking experience! :-)
User avatar
lunasparks
Billy
Billy
 
Posts: 238
Joined: Fri Oct 30, 2009 6:55 pm

Re: Reasonable 2x12 cab?

Postby lunasparks » Sun Oct 31, 2010 9:03 am

Update: I pulled the trigger on this ebay cab. Obviously not the Jerry specs provided by the cab makers on here, but for my budget and my music room it looks like it'll do the trick. If picture upload works you'll see the cab with my K120s. Seller defaults to rear-loaded speakers but gave me no extra charge for setting it up for front-loading.
Attachments
K120 cab.jpg
K120 cab.jpg (74.09 KiB) Viewed 2904 times
User avatar
lunasparks
Billy
Billy
 
Posts: 238
Joined: Fri Oct 30, 2009 6:55 pm

Re: Reasonable 2x12 cab?

Postby modz » Tue Dec 07, 2010 8:18 pm

lunasparks wrote:JB - so I would need to finish it with stain or tung oil (or something) in order to guard against problems? Not that this is problem for me, just clueless and want to confirm I'm understanding correctly. Full disclosure: I have basically no woodworking experience! :-)


Go to Home Depot or lowes and get cans of spray Lacquer. I would get a can of sealer and a can of lacquer in either satin or gloss. One is called sanding sealer. Spray a thin coat and sand to knock the bumps down. Use 800 to 1000 grit sand paper. It only takes a little pressure sanding then feel it with your hands and any rough spots sand it lightly. Spray, sand, spray, sand, spray, sand, spray, sand and you will get a furniture grade appearance. Light sanding!!!!
The cab turned out real nice! Congrads.
http://www.lowes.com/ProductDisplay?partNumber=84835-1075-015-13&langId=-1&storeId=10151&productId=3044472&catalogId=10051&cmRelshp=sim&rel=nofollow&cId=PDIO1
Tracy Lowe from Festus, MO
http://www.soundscaperproductions.com/
modz
Pigpen
Pigpen
 
Posts: 127
Joined: Sun Oct 25, 2009 9:38 am
Location: Festus, MO

Re: Reasonable 2x12 cab?

Postby Pete B. » Wed Dec 08, 2010 10:12 am

Here's the 2x12 cab I picked up locally a few years ago. Close enough for me!
It's pine. I have the speakers held in with wing-nuts and lock washers (I used long Carriage screws thru the front, then on the backside there is a Delrin spacer touching the speaker frame, then a normal washer, then a lock washer, then a wingnut), which makes for super easy "no tools requiered" speaker swaps (although in my case I swap 'em in/out just for fun tests and try outs, not cuz I blow 'em on stage).
The original speakers, EV SRO's, were front loaded, but the E120's in there now would not fit all the way into the cutout, so I have them rear loaded.
Image
User avatar
Pete B.
Senior Member
 
Posts: 1782
Joined: Mon Jul 23, 2007 9:59 am
Location: Portland, Oregon

Re: Reasonable 2x12 cab?

Postby schmidtz » Thu Dec 30, 2010 12:51 pm

I also bought one of the cabs from this guy. I finished it in some nice Oak stain and some poly. It is absolutely gorgeous. I'm using it in my Mesa rig with some vintage Celestion G12T's. It sounds amazing, if I do say so myself.

Here is a link to his actual website:
http://www.trmguitarcabs.com/

The guy is super nice, he would probably work with someone to build a hard trucker type cab.
"Learn as if you were to live forever; live as if you were to die tomorrow."
schmidtz
Pigpen
Pigpen
 
Posts: 129
Joined: Mon Jun 14, 2010 7:51 pm

Re: Reasonable 2x12 cab?

Postby Cmnaround » Fri Dec 31, 2010 5:01 am

Check the 2x12 cab from ear candy -custom cabs - sound great with a pair of tone tubby hemp cones

http://www.earcandycabs.com/index.php/guitar-speakers/speaker-insight-and-over-view/
Cmnaround
Rosemary
Rosemary
 
Posts: 278
Joined: Fri Apr 02, 2010 6:16 pm
Location: Philadelphia

Re: Reasonable 2x12 cab?

Postby Cmnaround » Fri Dec 31, 2010 9:31 am

Cmnaround
Rosemary
Rosemary
 
Posts: 278
Joined: Fri Apr 02, 2010 6:16 pm
Location: Philadelphia

Re: Reasonable 2x12 cab?

Postby lunasparks » Fri Jan 07, 2011 9:28 am

lunasparks wrote:Update: I pulled the trigger on this ebay cab. Obviously not the Jerry specs provided by the cab makers on here, but for my budget and my music room it looks like it'll do the trick. If picture upload works you'll see the cab with my K120s. Seller defaults to rear-loaded speakers but gave me no extra charge for setting it up for front-loading.


Could anyone suggest good/correct handles for my cab? My dad has a router so I can install some on each side, but not not sure about size, depth, correct build, etc. Any suggestions much appreciated.

Thanks!
User avatar
lunasparks
Billy
Billy
 
Posts: 238
Joined: Fri Oct 30, 2009 6:55 pm

Re: Reasonable 2x12 cab?

Postby jdsmodulus » Fri Jan 07, 2011 11:23 am

all of the ususal suspects sell these. I bought mine at US Speaker. Just do a search for speaker handles and you'll see the world. I dont think there is a "correct" handle simply because Hard Trucker cabs typically didnt have them. The "new" versions do and you can spec those from their website. Hope that helps.
jdsmodulus
Senior Member
 
Posts: 1252
Joined: Tue Dec 02, 2008 2:12 pm

Re: Reasonable 2x12 cab?

Postby lunasparks » Sun Jan 09, 2011 11:39 am

jdsmodulus wrote:all of the ususal suspects sell these. I bought mine at US Speaker. Just do a search for speaker handles and you'll see the world. I dont think there is a "correct" handle simply because Hard Trucker cabs typically didnt have them. The "new" versions do and you can spec those from their website. Hope that helps.


Thanks. I found something that looks okay and went ahead and ordered.
User avatar
lunasparks
Billy
Billy
 
Posts: 238
Joined: Fri Oct 30, 2009 6:55 pm


Return to Cabinets

Who is online

Users browsing this forum: No registered users and 0 guests