I swear there was already a thread on here about finding the right pots and caps. But I can't seem to find it. Must of got lost when the site did some new organizing. Anyways I primarily play a Carvin sh65 with Waldos preamp and OBEL. Love it, great guitar but the pots are already failing on me. It's a PRS type setup with two humbuckers, 500k volume, 500k push/pull pot for coil split and thats it. I would like to get a new volume pot, and a new tone pot. I'm going to wire my own separate coil split switch so I can have a higher quality pot. At first I found the RS website http://www.rsguitarworks.net/rsstore/index.php
. This was my first option I found. I could buy a $6 dollar CTS 500k tone pot, a $15 "custom" superpot vol 500k pot, and their popular Jensen .022 cap.
I then found this website which carries PEC pots. http://www.tubesandmore.com/
Here I could buy a $10 Linear tone 500k pot by PEC, a 25$ volume pot 500k also by PEC, and a similar ,022 Jensen cap type cap by Alessandro for 17$. Yes, PEC are much more expensive but they are built tough as far as I know. Just don't know if these three would fit well.