don't know if that mc250 is stock, but if it is, those are some 30+ year old electrolytic capacitors in there and should have been swapped out 15/20 years ago. you more then likely only need to swap out the electrolytics in there, and may consider sending the multi section cap can out to frontier electronics for a servicing before everett retires. the other single cap can, can be bought at audio classics. if your doing the job yourself, SOLDER SUCKER AND SOLDER WICK are your friend. those pads will lift if you heat them up too much. so be in and out as much as possible with the heat.
replacing those caps with better quality, longer lifespan new ones will get you another 30+ years out of that amp.
modz wrote:So I brought my MC250 to Brad and he put about $10.00 worth of capacitors in it for me and it kills now! Such a big difference. Big thanks to Brad. I used one channel at the Tuesday Schwag gig and it was so nice. LOUD TOO! I'm glad I didn't sell it now. Thanks for all of the input.
mijknahs wrote:If the pot goes out only from 5-8, it sounds like a bad contact in that pot (bad pot). Maybe it can be cleaned but probably needs to be replaced.
modz wrote:The guy with the 2300 backed out:( He came to me asking for a 2x12 cab and 500.00 bucks. Oh well the 250 sounds great so I will keep it!
Return to Grateful Dead Equipment Discussion
Users browsing this forum: No registered users and 0 guests