Shlotzkin wrote:Ok, I rewired the switch according to the diagram. The only sound i get is out of the neck pickup when the switch is in the bridge position. I must have a different 5 way switch. My common lug (the one that the blade is always touching) is where the picture says to solder the neck pickup. Any suggestions?
ok, if the glove don't fit we must acquit! LOL. i don't know what's up but i'll try and help. take the 2 common lugs you have, one you already have identified. one of those will have the input to the Preamp. that side of lugs will have the pickups wired to it, wire them in the correct position. now jumper the neck and bridge to their individual lugs on the other side of the 5 way. lastly, wire the tone control to the second unused common. the only open lug should be the shared tone control side of the 5 ways middle pickup position. the middle tone control will be wired directly to the middle on the pickup wired side of the 5 way.