First, go through all the Wolf and Tiger wiring diagrams that Waldo has posted on his site- that's where most of us start (thanks again Mike). Trace out the signal path until you understand it.
Second, look at the thread on "buffer or blaster". It talks in detail about how a buffer (active) requires a 25k volume pot, and a no buffer (passive) uses a 500k volume pot. You can't have it both ways without some complicated wiring. Take your pick.
Once you have been through both those information sources come back with any specific questions and we're here to help.
"Do not write so that you can be understood, write so that you cannot be misunderstood." -Epictetus
First show: 8/16/69 (Woodstock)
Last show: 3/19/95 (Unbroken Chain breakout)
Member of the Four-Decade Club
Charter Member, President & CEO of OAD (Order of the Ancient Deadheads)