1x12" Cab size question

1x12" Cab size question

Postby PaulJay » Sun Feb 02, 2014 9:51 pm

I have a speaker cab about the size of a deluxe reverb. I would like to put an E-120 in it. I was wondering if the size of that cabinet would effect the tone in a bad way, or should I use a smaller cube style cab? Thanks Paul
User avatar
PaulJay
Billy
Billy
 
Posts: 234
Joined: Fri Apr 08, 2011 10:40 pm

Re: 1x12" Cab size question

Postby TeeJay » Tue Feb 04, 2014 8:50 pm

The E120 sounds great in any Fender style open/semi open back cab I have tried. I say if it fits roll with it.
User avatar
TeeJay
Blues for Allah
Blues for Allah
 
Posts: 70
Joined: Sat Jul 27, 2013 7:56 am
Location: Kansas City, Missouri

Re: 1x12" Cab size question

Postby PaulJay » Wed Feb 05, 2014 9:04 pm

TJ, Thanks for the reply. I guess I'll throw it in there. If it sounds good, it will save me the trouble of building another cabinet. I think the bigger cabinet will warm up the tone of the e-120.
User avatar
PaulJay
Billy
Billy
 
Posts: 234
Joined: Fri Apr 08, 2011 10:40 pm

Re: 1x12" Cab size question

Postby TeeJay » Thu Feb 06, 2014 8:45 am

PaulJay, There is a thread on Jerrytone that starts with 2x12 vs 1x12 but has some of the posts deal with size of the cab that might be helpful. My ears have not been able to tell the difference between a plywood HT style and a plywood Fender style when used with the same speaker. I put an K120 in a fender style pine cab and the tone was warmer than when it lived in the HT box. I think the ply cabs have a slightly sharper tone to them.
User avatar
TeeJay
Blues for Allah
Blues for Allah
 
Posts: 70
Joined: Sat Jul 27, 2013 7:56 am
Location: Kansas City, Missouri


Return to Cabinets

Who is online

Users browsing this forum: No registered users and 0 guests