TI4-1009 wrote:I'm thinking that with HSH configuration you can use a 500k for bridge and neck, and a 250 for the middle single coil. Just not sure about wiring both humbuckers to a single pot, or if you'd need dual ganged 500? Anyone?
Leo at Scarlet Fire sells a dual strat jackplate for OBEL.
Tiger and Wolf both had a stacked dual pot for tone control of two pickups at once. Both pots controled by one knob, no independent adjustment.
I'm trying to cook up some sort of dual output jack system to fit over the strat football shaped input hole... I was thinking putting a couple of flat Les Paul style jack plates side by side but they measure up shorter than the length of the original jack cup. I'll be able to come up with something...
Cool... so that's like using a jumper to add the bridge pup to the second tone control on the strat... got it!Also, you can share one 500K pot for the hum buckers by using a jumper on the 5 way switch. You just don't have the luxury of one for each hum bucker.
I think Leo at ScarletFire makes just what you're looking for.
JamGuy wrote:Quick question… I know from looking at the Tiger wiring diagram that the two of the toggle switches are on/on…. is the one associated with the preamp also a DPDT on/on? Thanks...
Return to Guitar Building and Mods
Users browsing this forum: bzbz and 2 guests