Well I thought I'd have this project done by now. Between work and more importantly playing music I haven't had enough time to finish it. Hopefully tomorrow I'll finish the wiring if all goes well. I have the pickups in and about half way done with the wiring. Here's what the plan is:
Super 2 in the Middle
SD Pearly Gates in the Bridge and Neck
Each pickup has it's own switch for Humbucker/Single
Tone for Middle
Shared tone for neck and bridge
One thing I'm excited about is the Freeway 6 position switch. It feels just like a Gibson SG/LP switch but more options. It's basically two Gibson style three way switches in line with each other. when it's on the left side I wired to work like a standard Gibson - neck, neck and bridge, bridge. When on the right it selects neck and middle, middle, and middle and bridge. It allows for every position except all three and it's in a configuration that I think will be easy to adjust to from a Gibson switch. The switch goes up and down or left and right and seems to be well built. Here's the wiring diagram.