tigerstrat wrote:Another vote for a head + 1x12 cab. Two trips with medium loads is going to be less stressful then moving a single very heavy item.
twizzlybear wrote:barefootdave wrote:A strat in the middle position and a DRRI W JBL will get you most of the way there.
Thanks, this is what I thought. Is there a neo alternative to the jbl?
Note From Ted
I get asked a lot about neo speakers and how they evolved for this market. Here are my thoughts.
We engineers get all giddy about energy and power, so when the neo came along speaker engineers went crazy because of all the energy in a much smaller package. Where we would typically have 11K of energy in an AlNiCo, and maybe 13K of energy in a ceramic, they had over 15K in a neo. That's nice, except we can go overboard on anything and this is no exception. That much energy oversensitized the speakers and made them hard and harsh at high volumes with distortion. The first ones were unbearable.
Eminence and Celestion got a handle on it and made the necessary changes. As a result, they both have very good neo guitar speakers. The rest of the marketers are still clueless, apparently.
I started out designing ours with the AlNiCo energy as a target. The first question is... "why would someone purposely not take advantage of the energy in the neo?" My answer is because I was shooting for a tone, not a contest winning energy level, and the light weight is a bonus. So, that's where we are.
The neo energy in our NeoMag™ Series speaker is the same as the AlNiCo magnet circuit it emulates.
As a result, they sound the same. Virtually identical.
Next question: "Why do these weigh as much as a california 12? I thought neo speakers were a lot lighter weight than ceramics and others".
They are. Remember, our NeoMag™ Series is meant to replace original AlNiCo JBL D series speakers. Those weighed in at 18 to 22 pounds, while our Neo's are about half that.
Return to Jerry Tone
Users browsing this forum: No registered users and 6 guests