Everyone loves a build thread!

Everyone loves a build thread!

Postby proshy » Wed Apr 10, 2013 8:39 pm

Hello!

Trying my hand at the good ol' trade of guitar making! Since i peruse this site often for everything dead related, i thought it might be just a good idea to contribute.

Preface: I am no master builder, so 'hold your mud' cause i definitely make mistakes now and again..but one thing is for sure: i got a lotta patience and a smile for a face :-) (also, high attention to detail)...(also, love me some good natured advice from people way smarter than me :cool: )

So, spent a lotta time itching and researching the formidable "wolf"...But i'm convinced i got it down! Figured out what i thought the scale length was and made me a full size picture of the guitar, with some help from the kinkos staff, of course. Then was able to print out a 'spot on' template (presumably), to scale.

Took that over to some mdf, and made me a decent template to work with.

SOOO, this wolf is gonna be a mixture of what i got for a minuscule amount of tools and a minuscule amount of money..aka a poorman wolf, or as I like to say: a mangy wolf.

enjoy,
proshy
Last edited by proshy on Fri Apr 12, 2013 11:38 pm, edited 1 time in total.
proshy
TC
TC
 
Posts: 31
Joined: Sat Apr 16, 2011 5:46 pm

Re: Everyone loves a build thread!

Postby proshy » Wed Apr 10, 2013 9:05 pm

Get some alder from woodcrafters Image

gonna avoid that booger in the top right corner Image

Run it through the planer to get that tight joint, next is clampin and gluin Image

like this Image


Squeeze for 24 hours
proshy
TC
TC
 
Posts: 31
Joined: Sat Apr 16, 2011 5:46 pm

Re: Everyone loves a build thread!

Postby proshy » Wed Apr 10, 2013 9:30 pm

Glued up ready to dance (sorry, no red dress)
Image

Draw out the template, just for giggles
Image

Route out the neck joint (fender style) and swimming pool (not pictured, i forgot)
Image

Like that
Image

Relief cuts
Image

Rough cut body
Image

Flush trimmin'
Image

This part always freaks me out, it's one monster of a bit!
Image

Turned out pretty good!
Image
proshy
TC
TC
 
Posts: 31
Joined: Sat Apr 16, 2011 5:46 pm

Re: Everyone loves a build thread!

Postby proshy » Wed Apr 10, 2013 9:37 pm

Image

Pretty good for a days work!

Next phase: rear control cavity, pentiometer holes, bolt on holes, roundover sides and anything else i can think of...

:-) ,

proshy
proshy
TC
TC
 
Posts: 31
Joined: Sat Apr 16, 2011 5:46 pm

Re: Everyone loves a build thread!

Postby Grant » Thu Apr 11, 2013 3:29 am

Top effort proshy :cool:

Curious - how come you decided against a neck-through construction?
Grant
710 ashbury
710 ashbury
 
Posts: 252
Joined: Fri Apr 09, 2010 6:07 am
Location: Sydney, Australia

Re: Everyone loves a build thread!

Postby Rusty the Scoob » Thu Apr 11, 2013 6:17 am

Looking good, man! :cool:
User avatar
Rusty the Scoob
Senior Member
 
Posts: 2299
Joined: Mon Mar 03, 2008 5:28 am
Location: Concord, MA

Re: Everyone loves a build thread!

Postby strumminsix » Thu Apr 11, 2013 7:30 am

That's looking really good!
User avatar
strumminsix
Senior Member
 
Posts: 6647
Joined: Tue Apr 05, 2005 8:13 am
Location: Chicago

Re: Everyone loves a build thread!

Postby proshy » Thu Apr 11, 2013 11:09 am

Grant,

Thanks for the encouragement! Eventually, I'll be able to get the neck through going...that's the goal at least: Have a completely outfitted guitar making factory!

The bolt-on construction was an idea that i had when i was trying to find a custom builder to build my next guitar...Without any luck, nobody would make me a 'one-off' of the template i made, so i just decided to do it myself! With this, someone that has an old bolt-on neck lying around (or is willing to buy a pre-made neck from warmoth or something) can get the cool shape of wolf with the practicality of a leo style guitar.

:-) ,
proshy
proshy
TC
TC
 
Posts: 31
Joined: Sat Apr 16, 2011 5:46 pm

Re: Everyone loves a build thread!

Postby proshy » Thu Apr 11, 2013 11:25 am

Here's something just for fun, take a good long look :-)

Image
proshy
TC
TC
 
Posts: 31
Joined: Sat Apr 16, 2011 5:46 pm

Re: Everyone loves a build thread!

Postby rugger » Thu Apr 11, 2013 11:32 am

I like you already!

Lookin' good.

john in san diego
rugger
Rosemary
Rosemary
 
Posts: 298
Joined: Fri Jan 22, 2010 10:24 am

Re: Everyone loves a build thread!

Postby paulinnc » Thu Apr 11, 2013 7:21 pm

Looking good so far!!!
paulinnc
Senior Member
 
Posts: 550
Joined: Tue Jun 05, 2007 12:06 am
Location: Durham, NC

Re: Everyone loves a build thread!

Postby proshy » Fri Apr 12, 2013 11:08 pm

Update, didn't get a lot done... but enough for all you to get some popcorn! :cool:

Off to the sanding machine
Image


It was'a sweet sunny day!
Image

Smooth out them shadows
Image

Careful with that
Image

cute little roundover
Image

there ya go, off to the 'unique' side
Image

straightened him out good
Image

Cavity cuttin' time
Image

Cavity cover depth
Image

switch templates
Image

A ba'zillion passes later, 1/8 inch left for pentiometer shaft
Image

hole to the cavity, eyeball the angle
Image

like this
Image

hole was a little high comin out the rear, nothin to worryabout
Image

:-) ,

proshy
proshy
TC
TC
 
Posts: 31
Joined: Sat Apr 16, 2011 5:46 pm

Re: Everyone loves a build thread!

Postby proshy » Fri Apr 12, 2013 11:14 pm

Here's a sneak preview with an old johnson neck, pick-guard i assembled from the old johnson pickups (custom cut guard), and some ol' pot covers :smile:


Image

Image

:-) ,

proshy
proshy
TC
TC
 
Posts: 31
Joined: Sat Apr 16, 2011 5:46 pm

Re: Everyone loves a build thread!

Postby Ddavis510 » Sat Apr 13, 2013 8:03 am

Looking good. Keep it comin!
Ddavis510
Aoxomoxoa
Aoxomoxoa
 
Posts: 46
Joined: Thu Apr 11, 2013 5:32 pm
Location: Denver, Co

Re: Everyone loves a build thread!

Postby JonnyBoy » Sun Apr 14, 2013 11:37 pm

Gotta love guitar builds because there's always a happy ending. Looks great!
http://otislotus.net/ Finally finished our new site...
User avatar
JonnyBoy
Senior Member
 
Posts: 2134
Joined: Mon Mar 01, 2010 8:35 am
Location: the south swamps

Next

Return to Guitar Building and Mods

Who is online

Users browsing this forum: Yahoo [Bot] and 1 guest