Simpel DC Filiment supply for Crate BV-60

Chat about Equipment Info

Simpel DC Filiment supply for Crate BV-60

Postby 1dallek1 » Fri Sep 07, 2012 11:51 pm

I apologize I should put this in context for clarity, this amp came in with no filament voltage, the fuse protecting the circuit was blown. It could have gone at that but for the strange color of the filament feed connections next to the fuse. It was a long drawn out burn due to crimping to attach the connectors. it then turned out that the current draw of the filament chain was at and exceeding the filament fuse rating. This fuse value had been raised as part of the service update and it still wasn’t enough. The new dc filament PS to V1 was taken before the fuse to lessen the current draw and solve that. the dc supply itself was also intended to clean up the first stage of the preamp which was apparently noisy. I also replaced the filament connections and soldered the crimps for a better connection.

This supply was part of a service update for V1. this amp also needed serious help in the auto-bias section And several other service updates. the amp is still working strong its been months the owner happy.














Last edited by 1dallek1 on Mon Sep 10, 2012 11:25 pm, edited 5 times in total.
!!! ALWAYS WEAR EYE PROTECTION !!!
User avatar
1dallek1
Blues for Allah
Blues for Allah
 
Posts: 81
Joined: Thu Jun 09, 2011 10:06 am

Re: Simpel DC Filiment supply for Crate BV-60

Postby czyfingers » Sat Sep 08, 2012 4:04 am

Dear Admins,
Is there anything you can do to keep this douche from posting all his garbage?
czyfingers
Terrapin
Terrapin
 
Posts: 169
Joined: Sun Feb 17, 2008 4:22 pm
Location: Poughkeepsie, New York

Re: Simpel DC Filiment supply for Crate BV-60

Postby mkaufman » Sat Sep 08, 2012 4:48 am

Garbage?
THE best way to score gear: http://www.auctionstud.com

For discounts on extended Dell warranties: http://advantech-ny.com/mik/advantech/DellComputerWarranty
mkaufman
Senior Member
 
Posts: 1305
Joined: Tue Oct 02, 2007 6:26 pm

Re: Simpel DC Filiment supply for Crate BV-60

Postby hippieguy1954 » Sat Sep 08, 2012 4:56 am

douche?
Image
First show: 1973
Last show: 1994
User avatar
hippieguy1954
Senior Member
 
Posts: 1107
Joined: Thu Mar 24, 2011 1:29 pm
Location: Upstate, NY

Re: Simpel DC Filiment supply for Crate BV-60

Postby czyfingers » Sat Sep 08, 2012 5:12 am

Ok, some of the content may not be garbage, but it's always presented in such a douchy way, that I could live without it. If you examine a few previous posts involving mr. Koons, you'll see what I mean.
czyfingers
Terrapin
Terrapin
 
Posts: 169
Joined: Sun Feb 17, 2008 4:22 pm
Location: Poughkeepsie, New York

Re: Simpel DC Filiment supply for Crate BV-60

Postby hippieguy1954 » Sat Sep 08, 2012 5:20 am

We have. We know. We ignore. We don't add more useless posts. We leave that to you.
Image
First show: 1973
Last show: 1994
User avatar
hippieguy1954
Senior Member
 
Posts: 1107
Joined: Thu Mar 24, 2011 1:29 pm
Location: Upstate, NY

Re: Simpel DC Filiment supply for Crate BV-60

Postby czyfingers » Sat Sep 08, 2012 5:30 am

Ok mr. Hippieguy, no need to get all testy an arrogant about it. thanks for all your enlightenment though.
czyfingers
Terrapin
Terrapin
 
Posts: 169
Joined: Sun Feb 17, 2008 4:22 pm
Location: Poughkeepsie, New York

Re: Simpel DC Filiment supply for Crate BV-60

Postby hippieguy1954 » Sat Sep 08, 2012 6:01 am

testy an arrogant?
Image
First show: 1973
Last show: 1994
User avatar
hippieguy1954
Senior Member
 
Posts: 1107
Joined: Thu Mar 24, 2011 1:29 pm
Location: Upstate, NY

Re: Simpel DC Filiment supply for Crate BV-60

Postby mkaufman » Sat Sep 08, 2012 7:03 am

Regardless of the past, I am seeing very interesting and informative posts from someone who seems to know a lot. I'd rather see this than flaming.

mk
THE best way to score gear: http://www.auctionstud.com

For discounts on extended Dell warranties: http://advantech-ny.com/mik/advantech/DellComputerWarranty
mkaufman
Senior Member
 
Posts: 1305
Joined: Tue Oct 02, 2007 6:26 pm

Re: Simpel DC Filiment supply for Crate BV-60

Postby waldo041 » Sat Sep 08, 2012 9:56 am

mkaufman wrote:Regardless of the past, I am seeing very interesting and informative posts from someone who seems to know a lot. I'd rather see this than flaming.

mk


exactly! the fact that he is crooked, a liar, and a thief should have no bearing.

~waldo
User avatar
waldo041
Senior Member
 
Posts: 2746
Joined: Thu May 19, 2005 10:58 am
Location: Indiana

Re: Simpel DC Filiment supply for Crate BV-60

Postby czyfingers » Sat Sep 08, 2012 10:28 am

"exactly! the fact that he is crooked, a liar, and a thief should have no bearing."




Thank you Waldo. Finally, someone has the balls to call a spade.
czyfingers
Terrapin
Terrapin
 
Posts: 169
Joined: Sun Feb 17, 2008 4:22 pm
Location: Poughkeepsie, New York

Re: Simpel DC Filiment supply for Crate BV-60

Postby RiverRat » Sat Sep 08, 2012 3:10 pm

Go to the upper left of the forum and click USER CONTROL PANEL
Click the FRIENDS & FOES tab
ADD the user you wish to ignore. For example, 1dallek1
Click the SUBMIT button
Voila! Douche Be gone!!!

Image

Now available in family size!
RiverRat
Senior Member
 
Posts: 958
Joined: Thu Apr 10, 2008 10:38 am

Re: Simpel DC Filiment supply for Crate BV-60

Postby phpbb » Sat Sep 08, 2012 10:22 pm

Damn, this is great advice

make sure you choose the foes tab.

RiverRat wrote:Go to the upper left of the forum and click USER CONTROL PANEL
Click the FRIENDS & FOES tab
ADD the user you wish to ignore. For example, 1dallek1
Click the SUBMIT button
Voila! Douche Be gone!!!

Image

Now available in family size!
User avatar
phpbb
Senior Member
 
Posts: 1025
Joined: Fri May 07, 2004 9:37 pm


Return to Grateful Dead Equipment Discussion

Who is online

Users browsing this forum: No registered users and 1 guest