tube combo settings

tube combo settings

Postby tommybo » Sun Aug 05, 2012 10:06 am

i was recently re-reading some old posts when there in front of my eyes in black and white was the answer i had been looking for. i play thru a fender hot rod deluxe (speaker taken out) thru a commonwealth in a ssp cab---sounds pretty good but something was missing---i used the stock jerry amp settings--treble on 10- mids on 5 and bass on 0-- not entirely happy. so i come across this post "thick and thin" and waldo tells me in 1 sentence everything i've been looking for----treble between 4 to 7 depending on the room- mids cranked all the way and bass up to 3! i'm thinkin what the ----? so i try it----- total bliss --- i'm in jerry heaven- i can'y believe how good it sounds---then sarno further tweaks it and pin points it down to bass-2.3 to 2.5---you guys are right on!!!!!!!! it is very apparent that there is a handful of guys that really know what there talking about--- my suggestion to all the other readers out there---LISTEN TO THEM so to waldo,sarno and the few others THANK YOU!!!!!!
TommyBo
tommybo
bruce
bruce
 
Posts: 16
Joined: Mon Apr 09, 2012 3:55 pm

Re: tube combo settings

Postby mgbills » Mon Aug 06, 2012 7:49 am

That was my experience as well.

When I first found this board, I think I read every post. There were debates on very small details, but through all that reading the core of the Jerry tone question changed very little. As I have built & modified my own equipment, the sound advise found here (and given freely) by Brad, Mike (Waldo), and others has always played out. Even in heated debate (The Waldo/RiverRat/Alligator comes to mind), the core truth seems to win out.

As guitar players ...everyone hears an iconic tone in their head. 99% of Garcia tone building is here from an equipment standpoint... now if only my brain & hands would cooperate ....

:-) Peace & thanks to all.
M
"Hi Ho...the Carrion Crow...FoldeRoldeRiddle"
User avatar
mgbills
Senior Member
 
Posts: 828
Joined: Thu Apr 29, 2010 12:04 pm
Location: The Northwest Corner

Re: tube combo settings

Postby caspersvapors » Mon Aug 06, 2012 10:04 am

yea you really just gotta go with what sounds right to you. On my Pro Reverb for instance, after a couple years of fussing I realized that my favorite settings are Treble and Bass around 3-3.5 and the bright switch on. Then again, Im not trying to cop exact Garcia tone. But that sounds best to me and works with my gear and whichever I guitar I plug into it for the most part
Image
User avatar
caspersvapors
Senior Member
 
Posts: 1258
Joined: Fri Mar 03, 2006 1:58 pm

Re: tube combo settings

Postby Mosfed » Sun Aug 26, 2012 4:33 pm

Bright switch on?

Really? What do most people do? Using Waldos revised treb : 4-7 mid:10 bass 2-3 I feel like I get pretty close with a coil tapped super 2 or a strat with 60s custom shop pickups. As an amp / pre I am using a Silverface Bandmaster and a 2 x 12 D120 cab

The bright switch is a bit much. What say you?
--
"And I'm here by the road, tied to the load, that I picked up in ten thousand cafes and bars" - Barlow
Mosfed
Terrapin
Terrapin
 
Posts: 158
Joined: Mon Jul 09, 2012 4:03 pm

Re: tube combo settings

Postby Tony6Strings » Mon Aug 27, 2012 5:01 am

Mosfed wrote:Bright switch on?

Really? What do most people do? Using Waldos revised treb : 4-7 mid:10 bass 2-3 I feel like I get pretty close with a coil tapped super 2 or a strat with 60s custom shop pickups. As an amp / pre I am using a Silverface Bandmaster and a 2 x 12 D120 cab

The bright switch is a bit much. What say you?


I say... At bedroom/apartment appropriate sound levels IE around 2 (I really should get a practice amp, but for the moment my Twin serves as my house woodshedding amp as well as my stage rig), the bright switch can be a nice thing. Actually I think that's why it's on there, to give the amp that zing at lower volumes.
"Why do the best things always disappear, like Ophelia?"
User avatar
Tony6Strings
Brent
Brent
 
Posts: 93
Joined: Mon Dec 05, 2011 2:07 am
Location: Longview WA

Re: tube combo settings

Postby Pete B. » Mon Aug 27, 2012 2:05 pm

With the Volume on 10, the Bright switch is effectively out of the circuit, wether it's on or off.
If you have a Pre-amp out (so you can control the actual volume with the Power Amp), you can run the amp starting with Volume knob on 10, then bring it down a notch at a time and hear how the Bright switch on/off interacts with Tone at various Volume settings.
User avatar
Pete B.
Senior Member
 
Posts: 1788
Joined: Mon Jul 23, 2007 9:59 am
Location: Portland, Oregon

Re: tube combo settings

Postby Mosfed » Mon Aug 27, 2012 4:50 pm

I find the bright switch is a bit much at lower volumes or stage volumes. What's the common knowledge on Garcia having used it? I would think no
--
"And I'm here by the road, tied to the load, that I picked up in ten thousand cafes and bars" - Barlow
Mosfed
Terrapin
Terrapin
 
Posts: 158
Joined: Mon Jul 09, 2012 4:03 pm

Re: tube combo settings

Postby Pete B. » Mon Aug 27, 2012 5:26 pm

Some folks find it useful, simple as that.
YMMV.
I've used this example before, but... for example, if I'm playing Jerry stuff at rehearsal volume on a Les Paul with no coil splits, I'm gonna be using the bright switch.
I use it to make sure the wound strings sound right. I hate muddy wound strings.
It really should have been a third button on the Rev/Trem foot-switch, so you can toggle it on off as you play from high to low.
This is also true about the "Range" knob on a MuIII. Shoulda been a foot button.
User avatar
Pete B.
Senior Member
 
Posts: 1788
Joined: Mon Jul 23, 2007 9:59 am
Location: Portland, Oregon


Return to Jerry Tone

Who is online

Users browsing this forum: No registered users and 4 guests