JonnyBoy wrote:I went to radio shack and bought a 1/4" to RCA cord to go from my SMS to my MC100. It works great. I changed my 250 and 50 to 1/4", but kept the 100 stock in case I sell it I guess (yhea right). I have broken 3 of those cords on the 100 so far, and one of those times the pin in the middle broke off in it and got stuck into the Mac end of the jack. It has enough room to push it all the way in, I guess you get one Gimme before your screwed and have to change the RCA plug out anyway. There is really no "sound" difference in using RCA or 1/4", just the ease of not needing a special cord.
I love my rig above and beyond many many different amps/rigs I have used. Anyone on the fence wanting to get one or think it makes little difference, I strongly urge them to give it a go. I think its about one of the only rigs you can sell off for close to what you paid for it in the end anyway. Not only Jerry lives in there, but many great tones. on the "Con" side of the coin, it is a bitch to move around. get wheels.
JonnyBoy wrote:I have been having issues now with my MC250. I play low through it and its fine, I start playing at a reasonable volume or pushed it starts going out and making my speaker flop and freak out. I change power amps and it is gone. no issue anywhere else, so it is the MC250. since it is all working, I am assuming it needs cap replacement and upgrading. I will play and things will seem fine, then I dig in and it starts going in and out on me, and making the speakers flutter. I turn down the volume and wait a second I can play and its fine, then add more power again and there it goes again. New caps?
Does anyone know the kind of signs or behaviors the system will have when caps need to be replaced?
mkaufman wrote:What did you use before the MC100 conversion? 1/4" <-> RCA adapter?
Return to Jerry Tone
Users browsing this forum: gratefulredhead, Yahoo [Bot] and 3 guests