HELP JERRY RIG SCHEMATIC

HELP JERRY RIG SCHEMATIC

Postby softmachine72 » Wed Jul 18, 2012 2:36 pm

I went looking for the pic of Jer's FX schematic on the gear page of dozin.com on the link is dead . anyone still have it?
User avatar
softmachine72
Steal Your Face
Steal Your Face
 
Posts: 203
Joined: Wed Mar 17, 2010 1:11 am
Location: Dallas Tx

Re: HELP JERRY RIG SCHEMATIC

Postby jmfranc » Fri Jul 20, 2012 7:55 pm

User avatar
jmfranc
Pigpen
Pigpen
 
Posts: 130
Joined: Thu Oct 01, 2009 1:04 pm

Re: HELP JERRY RIG SCHEMATIC

Postby SarnoMusicSolutions » Sat Jul 21, 2012 8:57 am

The Ernie Ball volume pedal as shown in that schematic is incorrect. The EB volume pedals in Jer's rig were used as controllers for effects; phaser speed, delay volume, delay time...

That schematic should show the cord coming directly from the guitar to the input of the Silverfaced Fender.


B
... and it's just like any other day that's ever been...
SarnoMusicSolutions
Senior Member
 
Posts: 1047
Joined: Tue Jan 27, 2009 6:15 pm
Location: St. Louis, MO - USA

Re: HELP JERRY RIG SCHEMATIC

Postby waldo041 » Sat Jul 21, 2012 9:17 am

something more like this, but later with an ada 2fx(delay) with remoted EB volume pedals for the mix and multiplier knobs.

Image

~waldo
"Tone is in the instruments. Technique in the hands. Do what you will." ~ quote from some guy at the TGP forum
User avatar
waldo041
Senior Member
 
Posts: 2803
Joined: Thu May 19, 2005 10:58 am
Location: Indiana

Re: HELP JERRY RIG SCHEMATIC

Postby softmachine72 » Thu Aug 02, 2012 10:48 am

Thanks Waldo . a true fountain of knowledge of all things Jerry. it was weird that the link used to be there on the pro rig site.
User avatar
softmachine72
Steal Your Face
Steal Your Face
 
Posts: 203
Joined: Wed Mar 17, 2010 1:11 am
Location: Dallas Tx

Re: HELP JERRY RIG SCHEMATIC

Postby softmachine72 » Thu Aug 02, 2012 10:54 am

Waldo do you believe that the order started with distortion on the octave and mu III. i know all these were true bypass through the custom switching unit,. or were they placed in that order and wired differently?
User avatar
softmachine72
Steal Your Face
Steal Your Face
 
Posts: 203
Joined: Wed Mar 17, 2010 1:11 am
Location: Dallas Tx

Re: HELP JERRY RIG SCHEMATIC

Postby waldo041 » Thu Aug 02, 2012 8:33 pm

softmachine72 wrote:Waldo do you believe that the order started with distortion on the octave and mu III. i know all these were true bypass through the custom switching unit,. or were they placed in that order and wired differently?



not exactly sure what it is you are asking but it is ordered and wired exactly as i have shown. he does replace the first slot where the Boss DS-1 is with an MXR Series 2000 Distortion+ and then an Boss HM-2. but up until the Boss OC-2 arrives, an overdrive/distorion sits in slot 1 before the MuIII and MuOctDiv. When the OC-2 arrives it resides and stays in Slot 1, even when cutler true bypass switcher #2 comes with the "90's" rack.

~waldo
"Tone is in the instruments. Technique in the hands. Do what you will." ~ quote from some guy at the TGP forum
User avatar
waldo041
Senior Member
 
Posts: 2803
Joined: Thu May 19, 2005 10:58 am
Location: Indiana


Return to Jerry Tone

Who is online

Users browsing this forum: No registered users and 2 guests