Smolder wrote:Hi Scott... I've got mine disassembled and assembled.. all of the construction and assembly parts are worked out. The final pick up measures 6.4 ohm. Is that about right? Most worrisome, I have a very weak volume coming from this pickup. I'm guessing that might be the magnet orientation. They both 'pulled' to the poles... and I've tried reversing the polarity of the leads. Any thoughts, or is it just trial and error with the magnets?
ScottWalkerGuitars wrote:Nice! 6.9 though? is it s Super 2 your using?
This project will potentially need some fussing with, because of the RW/RP and integrating it with other single coils. Its not a fool proof scenario, but with some swapping the polarity and exchanging leads, you can get it to work.
Mosfed wrote:To people who have tried this. Have you been able to compare how this sounds to a coil split Super 2? I realize it should sound pretty close but...
ScottWalkerGuitars wrote:Right on! Yeah plus its fun. Im sure Dimarzio will make you an under wound SDS-1, but it won't have the brass plate, which is part of the "Super 2". Im working on posting my Brass plate linework Document, so anyone can print it and use it to make there bottom plate.
Return to Guitar Building and Mods
Users browsing this forum: Bing [Bot] and 1 guest