Tony6Strings wrote:I built a BYOC Dist+ circuit, and while I was happy with the tone (after I left it on for a week) the output left something to be desired. Had to dime it for it to be usable in my rig. How is the output on your vintage spec clones? Just curious. Moot point for me, as I recently acquired an OCD which is by far the most usable and transparent of the Dist+, DS-1, RAT etc. type effects that I've worked with.
claytushaywood wrote:Tony6Strings wrote:I built a BYOC Dist+ circuit, and while I was happy with the tone (after I left it on for a week) the output left something to be desired. Had to dime it for it to be usable in my rig. How is the output on your vintage spec clones? Just curious. Moot point for me, as I recently acquired an OCD which is by far the most usable and transparent of the Dist+, DS-1, RAT etc. type effects that I've worked with.
Well... the dist + doesnt have that much output compared to a lot of different OD pedals- thats part of the design. and I definitely wouldnt put ANY of those pedals you mentioned in the same category with each other... none of them are similar except maybe the rat and the dist +, but that rat adds a transistor that adds a whole lot more gain, so they sound nothing alike. the OCD aint nothing like these pedals either... to be fair all the pedals you mentioned are completely different... I mean, right now my setup includes a dist +, a rat, a timmy, a zen drive, an ampeg amp in a box and a hiwatt amp in a box pedal. that's not even including fuzz there.
the mxr dist + is for jerry tones. not for transparent overdrive. jerry didnt use the dist + as a transparent booster or a transparent OD- he used it as a full on distortion. the transparent od thing doesnt seem like it would be the best thing to cut through the grateful dead wall of sound with...the dist + is right in line with his style of clean tones- cutting, but thick, definitely lacking bass. The byoc dist + doesnt have nothin on this version either, IMO. If you want a true to vintage dist +, i can build it...
Using all ceramic caps and either all carbon comps or carbon films (they used both back in the day) I actually settled on a 'better' opamp in my version, the old metal can 741's found that are popular for rat builds. I liked these more than the lm741cm's... I'll see if I can record sound c
lips of the differences here soon, it's minor, but I think they just made the big metal can opamps better.
as for the volume- every time i've seen a dist + on someones board its been volume max out- gain at 50% or more. There's nothing wrong with running a pedal full bore... in fact I'd say it's more natural than limiting the output with a potentiometer if you get down to brass tacks!
Jerry1996x wrote:IMHO, if you want a great dist pedal, that can go anywhere from just adding a little fatness to your tone, to adding a full on Hell In A Bucket dist, go for a vintage DOD 250 Preamp Overdrive. It was the first pedal I ever got, my uncle gave it to me. They are cheaper than a vintage Dist+, and in my opinion, just do the job better all around. Im actually surprised that Jerry never used it. It really nails that early Jerry light distorted tone. Just my 2 cents
Return to Jerry Tone
Users browsing this forum: No registered users and 2 guests