Jerry amp question

Re: Jerry amp question

Postby Urblues » Wed Apr 04, 2012 6:49 am

Alright lots of info learned today. Now I've seen macs on ebay for pretty cheap, but no 2300s. Will a 2200 work or is that out of the question? I also think that 2500's would work as well but they are a little to steep. By the way for anyone who is interested I decided to go with a gibson cs 356 one off. If you google "ceremona burst" the hollow body that pops up is my exact guitar.
Posts: 37
Joined: Sun Dec 11, 2011 3:00 pm

Re: Jerry amp question

Postby Pete B. » Wed Apr 04, 2012 11:55 am

Thanks for the great pics and explaination, Waldo!
User avatar
Pete B.
Senior Member
Posts: 1821
Joined: Mon Jul 23, 2007 9:59 am
Location: Portland, Oregon

Re: Jerry amp question

Postby JonnyBoy » Wed Apr 04, 2012 12:33 pm

You can use an MC50 MC250 MC2505 MC100 MC 2100 MC2101 up to the MC2300. All seem to have the circuitry we are after tone wise. Those are listed from smallest amps to largest, i may be skipping one or two. I can play a pretty good sized gig with my MC100 (a mono 100 watt amp). A MC250 is very common and affordable allowing you to have either 2x70 watt amps or bridged at around 140 watts or run two speakers in stereo @ 70 watts each. That is more than plenty for most folks. Finally finished our new site...
User avatar
Senior Member
Posts: 2133
Joined: Mon Mar 01, 2010 8:35 am
Location: the south swamps


Return to Jerry Tone

Who is online

Users browsing this forum: Frank N Stein and 4 guests