gdrfk1990 wrote:Waldo do you have one of these for 2 super 2's and a humbucking single coil with a 25k volume and 2 500k tones with no switches or OBEL ?
with no coil toggles for single and humbucker operation, the wiring is pretty much identical to the above layout for a humbucker setup. the difference is in the super 2 color code. the super 2's will have the black and white wires tied and soldered together then shrink wrapped. the red will still be hot, but the green and shield will go to ground versus the black shown above. the sds one will have black and white wires and the black will go to the 5 way instead of the neck red shown. the white and shield will go to ground.
that said, jerry played a ton in the middle single coil position and is even quoted as doing so. you may want to rethink the no toggle/coil switches approach if your going this far.
"Tone is in the instruments. Technique in the hands. Do what you will." ~quote from some guy at the TGP forum
"Without a doubt, the quality of your instrument will effect your tone, and any pickups, effects, amps, and microphones used along the way will also have an impact on the sound waves."~Cameron Mizell