from left to right top shelf 1-4
from left to right bottom shelf 5-8
the order is inline 1-8 and not interchangeable for both the 80's and 90's rack.
hippieguy1954 wrote:I've been looking at the pics of Jerry's rig when he was using the mxr D+ and trying to figure out what position it is in the chain. I read a few posts (in here somewhere) that mention Jerry being able to change the order of the efffects in the chain with his foot switches. Does anyone know what order he used most, when he was still using the mxr D+? Also, did he ever use the mxr before the the octave and the envelope? I've been tryin to get it straight for a while.
here is the breakdown i see.
when he first uses the "80's" rack with Cutler switching unit in aug 79, nothing is before the 2 mutron's on the top shelf. but it wasn't very long in late 79 that he began using the Boss DS1 right after the Mutrons top shelf position 4. that was so brief by 1980 the Boss DS1 gets moved from behind to in front of the Mutrons and stays there until sometime in 1982 when it leaves and the MXR Dist+ gets moved from the bottom shelf to the top before the Mutrons. no Dist/OD on bottom shelf, just phaser and Analog delay. at the begining of 1983 the MXR Dist+ is moved back to the bottom shelf before the MXR phaser. briefly there is no Dist/OD on top shelf. but by the end of 83 the MXR Series 2000 Distortion + is placed in position 1 top shelf. the series 2000 stays there until around 1987ish. then the Boss HM2 arrives and replaces the MXR Series 2000 Dist+ sometime in 1987/88ish. but by 1989 the HM-2 was replaced with the Boss Turbo OverDrive OD-2 and the MXR Dist+ was replaced with the Boss OverDrive OD-1. in 1992 the EQ's are added to each shelf after the Boss OD's.