Hey so I just finished up wiring a guitar with a rosebud type wiring, (3 super 2's, the neck and middle on a master splitter and the bridge always humbucker) I used Waldo's scheme but I altered it a bit to make it work. The problem I'm having is, I'm getting a really bad buzz when I split the super 2's it's very loud. But I grounded the switch to the main ground.. Also the only tone pot that works is the one for the middle, which is where I soldered the capacitor right on the middle lug on the 5 way switch along with the middle super 2 like in waldo's scheme. Then for other pit I soldered it to the common lug, I have a feeling that was my mistake no?
As for the humming when split, I know that you'll experience some hum, but this is obnoxiously loud!