Wiring a Telecaster for Super 2

[BJolley]

Looking for some help rewiring a Nashville Telecaster for a Super 2 in the middle. The Nashville is wired with a 5-way Strat switch and has Tex-Mex Tele neck and bridge pickups, as well as a Strat single coil in the middle. It comes wired for B-BM-M-MN-N switching. In addition to adding a mini switch to split the Super 2, I'd like to rewire it to run B-BM-M-BN-N to be able to get both Jerry-type tone as well as traditional Tele bridge/neck combo tone. Can this be done with the stock Strat-type switch?

[barefootdave]

If you reverse the wiring between bridge and middle pickup, I mean just attach one to the other and vice versa, you should get:

1. Neck
2. Neck + Bridge
3. Bridge
4. Middle + Bridge
5. Middle

This would be handy in a way, because when you want to go to JG tone you just flip the switch all the way to the bottom. Your first three settings are your standard tele sounds. I think this addresses your request exactly. (Hawk would be so proud of me)

[BJolley]

Thanks' for the tip, Barefoot Dave.

Any way to have it go:

1: Bridge
2: Bridge/Mid
3: Mid
4: Bridge/Neck
5: Neck?

Or is the Strat switch not configured for this? Thanks.

[barefootdave]

I am not an expert on wiring, hopefully someone else will join in that knows more than me. I only knew what I told you because I am going to reverse pickups in a strat in order to get both strat and tele configurations out of it. It needs to be simple for me to be able to do the work.

I am fairly sure a qualified technician could easily do what you are asking.

[JonnyBoy]

That can't be done with wiring the pickups straigt to the switch as they normally are. Dave is right, you can flip the pickups or you can create a toggle switch circuit that can turn on the neck pickup when you are in the bridge position, or vise versa. That is usually how its done, from my experience...

[BJolley]

Thanks for the input. I'll try the suggested simple wiring mods and get used to throwing it all the way back to get the middle Super 2. Good news for Nashville Tele owners: I discovered that the Nashville is routed with a swimming pool for the neck and middle P/Us. So I can plug the super 2 in without any mods to the guitar other than the pick guard.

http://sphotos-a.xx.fbcdn.net/hphotos-a ... 6861_n.jpg

[BJolley]

I finally got around to finishing this project.

http://sphotos-b.xx.fbcdn.net/hphotos-a ... 2907_n.jpg

[Grant]

Neat!
I'd love to hear it - what amp are you playing through?

[RiverRat]

Thanks' for the tip, Barefoot Dave.

Any way to have it go:

1: Bridge
2: Bridge/Mid
3: Mid
4: Bridge/Neck
5: Neck?

Or is the Strat switch not configured for this? Thanks.

How about this instead...

standard strat 5 way + Neck for position 1,2 or 3



That's the wiring diagram for David Gilmour's Black Strat, you can also accomplish this without the extra switch by using a push pull volume pot

[tigerstrat]

I finally got around to finishing this project.

Love it!

[BJolley]

Grant, long story short I'm currently only playing through a Fender Frontman 15R practice amp.

Long story long, I had a 1980's Seymour Duncan 60 watt tube amp that bit the dust recently (it was a bit dark for Jerry amp). I also had a Fender Twin '65 reissue on loan from a friend for several months but he recently needed it back. I now have a Fender Mustang III en route as I write this. Once the Mustang arrives I'll see if I can figure out the digital interface with my computer to upload some sounds.