Wiring help in Denver CO?

[Griz]

Electrically challenged geezer building guitar #2

First one turned out well (main stage axe) and #2 will be looking at Waldo buffer and OBEL
It will have the Super II in the middle, and some other tones ... Area 58 in neck and a filtertron in the bridge.

Any suggestions for someone to hook up with?

Thanks, ALL


Griz

[TI4-1009]

You can do it! As long as you can post photos, you have a lot of help right here.

[hippieguy1954]

Use Waldo's site! All the info you need is there and if you need any other help, just ask!

[gpilcher2001]

send me a pm I can porbably help I'm outa golden. kinda busy but lets talk. I've done few of these on my guitars. Greg.....

[milobender]

I'm in Laramie, and I'd be happy to help too, if you can't find anyone closer.

Brian

[Griz]

Thanks, Gentlemen !

I figured there might be somebody reasonably close.
May be a little ways off, and was checking my options.
Most techs are not familiar with OBEL and buffer stuff.

Griz

[TI4-1009]

Griz- If I did it you can do it. With the waldo diagrams, the wiring photos posted here:

http://www.rukind.com/forum/viewtopic.php?f=426&t=7985

and a good 45 watt soldering iron, it's do-able.