Wolf Body Laminations

Wolf Body Laminations

Postby Woody » Tue Mar 08, 2011 9:12 am

Hi all,
Does anyone have info on how thick the Purpleheart core, and successive laminations are on the body of Wolf? I've seen some info on Dozin' that says the maple and purpleheart laminations are 1/28". Does this sound accurate?
Thanks,
Woody
Last edited by Woody on Tue Mar 08, 2011 10:17 am, edited 1 time in total.
"Searching for the Sound"
User avatar
Woody
tiger
tiger
 
Posts: 24
Joined: Tue Sep 28, 2010 5:00 am

Re: Wolf Body Laminations

Postby JonnyBoy » Tue Mar 08, 2011 9:29 am

http://otislotus.net/ Finally finished our new site...
User avatar
JonnyBoy
Senior Member
 
Posts: 2134
Joined: Mon Mar 01, 2010 8:35 am
Location: the south swamps

Re: Wolf Body Laminations

Postby Woody » Tue Mar 08, 2011 10:42 am

Thanks, man. That's an awesome site, and together with Dozin' is where I most of my info. I was able to scale my drawings from several of the photos there, but there aren't any side shots, and I don't see anything on the thickness of the purpleheart core. I've got excellent info from this forum, and I appreciate your input.
"Searching for the Sound"
User avatar
Woody
tiger
tiger
 
Posts: 24
Joined: Tue Sep 28, 2010 5:00 am

Re: Wolf Body Laminations

Postby alcorelectric » Tue Mar 08, 2011 3:46 pm

Woody,
I built a wolf copy a while back.
The center core I used 3/4" Purpleheart
The laminations had to be doubled up as I could not find the correct thickness
T
alcorelectric
710 ashbury
710 ashbury
 
Posts: 255
Joined: Mon Mar 06, 2006 7:51 am

Re: Wolf Body Laminations

Postby Woody » Fri Mar 11, 2011 7:06 am

Hey T,
Thanks for the input. When you say your laminations needed to be doubled up, do you mean that you doubled the thickness so that 1/28" is 1/14"? Also do you have any pics of your final build?

Wood
"Searching for the Sound"
User avatar
Woody
tiger
tiger
 
Posts: 24
Joined: Tue Sep 28, 2010 5:00 am

Re: Wolf Body Laminations

Postby alcorelectric » Sat Mar 12, 2011 11:40 am

As I recall the thickness I was able to get was 1/58" I doubled them up to get 1/28"
I will look around for some pics Its been a while since I had the guitar
T
alcorelectric
710 ashbury
710 ashbury
 
Posts: 255
Joined: Mon Mar 06, 2006 7:51 am

Re: Wolf Body Laminations

Postby alcorelectric » Sat Mar 12, 2011 6:48 pm

Image

Here you go
T
alcorelectric
710 ashbury
710 ashbury
 
Posts: 255
Joined: Mon Mar 06, 2006 7:51 am

Re: Wolf Body Laminations

Postby Woody » Sat Mar 12, 2011 10:10 pm

Hey T,
Nice job. Thanks for getting that pic for me. I kept thinking that 1/28" was not going to be thick enough to make the right impact, but it looks great. Thanks again.
Wood
"Searching for the Sound"
User avatar
Woody
tiger
tiger
 
Posts: 24
Joined: Tue Sep 28, 2010 5:00 am

Re: Wolf Body Laminations

Postby paulinnc » Mon Mar 14, 2011 8:32 pm

Where did you get the laminate sheets? I am doing a similar project and am looking for purple heart sheets.
paulinnc
Senior Member
 
Posts: 555
Joined: Tue Jun 05, 2007 12:06 am
Location: Durham, NC

Re: Wolf Body Laminations

Postby alcorelectric » Tue Mar 15, 2011 12:36 pm

Where did you get the laminate sheets? I am doing a similar project and am looking for purple heart sheets


I believe I buoght them from an online supplier
Its been a while
If I find the name I will pass it on
T
alcorelectric
710 ashbury
710 ashbury
 
Posts: 255
Joined: Mon Mar 06, 2006 7:51 am

Re: Wolf Body Laminations

Postby paulinnc » Fri Mar 18, 2011 9:04 pm

A little bird told me about grizzly industrial supplies. They have veneer sheets.
paulinnc
Senior Member
 
Posts: 555
Joined: Tue Jun 05, 2007 12:06 am
Location: Durham, NC

Re: Wolf Body Laminations

Postby Woody » Sat Mar 19, 2011 9:32 am

Funny, this morning, I was looking at tools in my new Grizzly catalog that arrived this week, and was working my way to the wood section. I did notice, online, that they sell some pretty nice billets of quilted maple. I haven't looked into it in any detail, except that they no longer sell their top specimen, nor do they sell the 4A level, but they still have 5A quality.

Last year, I bought several purpleheart shorts (48") from Downs and Reader in Stoughton, MA. I have since used it all, and went back for more. The purpleheart they had availble was much lighter in color, and the grain was not as tight. They told me that if I call a day in advance, they can pull some more stock from the back warehouse. It's a bit of a ride, so I need to find the extra time.

Thanks for the tip, I'll check their veniers. It would save time to have the wood already sliced instead of having to get the rough cut, plane adjacent edges, and resaw (although I find that oddly satisfying).

Wood
"Searching for the Sound"
User avatar
Woody
tiger
tiger
 
Posts: 24
Joined: Tue Sep 28, 2010 5:00 am

Re: Wolf Body Laminations

Postby alcorelectric » Sat Mar 19, 2011 10:14 am

Im pretty sure this is the guy I got the lams from
http://stores.ebay.com/id=137223963&ssP ... :MEFSX:SST
T
alcorelectric
710 ashbury
710 ashbury
 
Posts: 255
Joined: Mon Mar 06, 2006 7:51 am

Re: Wolf Body Laminations

Postby paulinnc » Thu Jun 14, 2012 9:47 am

The wings I made ended up being a 1" PH core with 1/16 maple > 1/16 PH> 1/4 Maple on each top and bottom. It worked out nicely.
paulinnc
Senior Member
 
Posts: 555
Joined: Tue Jun 05, 2007 12:06 am
Location: Durham, NC

Re: Wolf Body Laminations

Postby softmachine72 » Fri Jun 15, 2012 11:22 am

That 1/16 is way too thick. the lams are two different thicknesses. the maple is .040 a hair more than a 1/32 the purple is about .020 a hair more than 1/64. the top and bottom is about 1/4 inch. all those layers together = about .75 add 1 inch for the core and you have the 1.75 thickness measures by Waldo when he had the guitar. see photos
http://s1027.photobucket.com/albums/y337/softmachine72/
User avatar
softmachine72
Billy
Billy
 
Posts: 240
Joined: Wed Mar 17, 2010 1:11 am
Location: Dallas Tx

Next

Return to Guitar Building and Mods

Who is online

Users browsing this forum: No registered users and 2 guests