TRM cab finish

Re: TRM cab finish

Postby eric » Wed Apr 24, 2013 2:46 am

TI4-1009 wrote:I used Lowe's "Tung Oil Finish" on my pine TRM cab, 5-6 coats. It's not a very hard, "protective" type of finish- like poly, but you can just add another coat when you want to. Just remember that the "tung oil" you get at the big box places isn't really pure tung oil, it's mostly solvent that dries off quickly leaving behind a little tung oil. You have to poke around to get the real full-strength tung oil.


This^^^. The "Tung Oil" at big box stores is complete garbage , and not really Tung Oil at all . What you want is Waterlox Original. 1 quart off Amazon will do you . Stuff is about $30 /qt & $120 a gallon and worth every penny. Easiest Pro finish in the world to apply. And can be reapplied antime over the years with no prep , unlike poly , which will yellow and chip and crack and flake over time and just look like shit in general . Waterlox "melts " into each succesive coat, whreas poly build tiny tiny layers . It is waterproof ,super hard as hell when fully cured ( its a wood floor finish as well), and will naturally de-gloss within 6 months for a hand rubbed look . Check out the Woodmans video's on YT Waterlox on Mahogany. Like I said , it's the most user friendly finish in the world . It's idiot proof , and then some. Apply with a disposable foam brush , little to no sanding b/t coats . Bam, 6 coats and you're butter! As for the legs , it's simple ; get mismatched rubber feet for front and back . Get 2 jumbo 1 1/2" or 2" feet for the front , and put 1/2" feet in the rear . Perfect elevation tilt with no fuss. Love my TRM as well , congrats on the score!!
eric
710 ashbury
710 ashbury
 
Posts: 271
Joined: Wed Sep 15, 2010 7:00 am
Location: CT / RI

Re: TRM cab finish

Postby Chuckles » Wed Apr 24, 2013 11:16 am

You can also find tung oil - the good stuff - at a marine supply store
Seems like I've been here before...

The Road's Facebook Page (including links to tunage) is here:
http://www.facebook.com/pages/The-Road/ ... 200?ref=nf
User avatar
Chuckles
Senior Member
 
Posts: 1151
Joined: Sun Nov 11, 2007 1:52 pm
Location: DC

Re: TRM cab finish

Postby eric » Wed Apr 24, 2013 11:35 am

Ya , I thought about using the marine-grade stuff on my next cab .. Stuff is supposed to be indestructible .. Perfect if you are gigging with that thing
eric
710 ashbury
710 ashbury
 
Posts: 271
Joined: Wed Sep 15, 2010 7:00 am
Location: CT / RI

Re: TRM cab finish

Postby TI4-1009 » Tue Apr 30, 2013 7:02 am

I finally found some Waterlox in a hardware store, but it didn't look like pure tung oil? Container listed the top 5 ingredients and tung oil was second on the list behind some solvent.
"Do not write so that you can be understood, write so that you cannot be misunderstood." -Epictetus

First show: 8/16/69 (Woodstock)
Last show: 3/19/95 (Unbroken Chain breakout)
Member of the Four-Decade Club
Charter Member, President & CEO of OAD (Order of the Ancient Deadheads)
User avatar
TI4-1009
Senior Member
 
Posts: 1458
Joined: Fri Aug 20, 2010 6:27 am
Location: Upstate NY- Toodaloo

Re: TRM cab finish

Postby eric » Tue Apr 30, 2013 8:59 am

Correct. Waterlox isn't "pure tung" . 100% tung oil would take literally years to dry. It uses a solvent system as a carrier and then the solvent quickly evaporates and then it becomes dry (yet not fully cured). It is also mixed with a resin , which provides its own benefits as well. However , the tung oil in WL is superior to anything at the big boxes because of the source of the tung oil is true. Won't chip , flexable and breathes with the wood , becomes food grade safe once the solvent fully evaporates and is cured!! Eat a steak off your cab if you like! Yet , the fumes are just obnoxious , use a proper respirator with plenty of ventilation , but it disappears quickly.
eric
710 ashbury
710 ashbury
 
Posts: 271
Joined: Wed Sep 15, 2010 7:00 am
Location: CT / RI

Re: TRM cab finish

Postby TI4-1009 » Tue Apr 30, 2013 10:41 am

Can I Waterlox over my Formby's/Lowes "tung oil finish"?
"Do not write so that you can be understood, write so that you cannot be misunderstood." -Epictetus

First show: 8/16/69 (Woodstock)
Last show: 3/19/95 (Unbroken Chain breakout)
Member of the Four-Decade Club
Charter Member, President & CEO of OAD (Order of the Ancient Deadheads)
User avatar
TI4-1009
Senior Member
 
Posts: 1458
Joined: Fri Aug 20, 2010 6:27 am
Location: Upstate NY- Toodaloo

Re: TRM cab finish

Postby seniorpesca » Sun May 05, 2013 11:15 am

tung it is!!! thanks everyone
seniorpesca
Ice Cream!
Ice Cream!
 
Posts: 124
Joined: Sat Mar 03, 2012 11:51 am

Previous

Return to Cabinets

Who is online

Users browsing this forum: No registered users and 1 guest