TRM cab finish

TRM cab finish

Postby seniorpesca » Wed Apr 17, 2013 11:11 am

So today is the day, I just got my TRM hardtrucker's style cab. Will upload pictures very soon, came with some damage on two corners so I am going to see what Tim says before I do any finish work to it. But I was wondering what kind of finish you guys used? I have very very minimal woodwork experience (last time being 8th grade shop). I also am wondering if you guys put legs on the bottom of yours of what..would love some feed back..will post pics very very soon. Also curious if you wired you JBLs series or parralel


Thanks

Josh
seniorpesca
Pigpen
Pigpen
 
Posts: 125
Joined: Sat Mar 03, 2012 11:51 am

Re: TRM cab finish

Postby tcsned » Wed Apr 17, 2013 11:32 am

Dunno about the other stuff but you want to wire in parallel. Unless you have a Marshall amp that only has 8 & 16 ohm speaker outs.
User avatar
tcsned
Senior Member
 
Posts: 2729
Joined: Sat Mar 21, 2009 2:50 pm
Location: Blacksburg, VA

Re: TRM cab finish

Postby seniorpesca » Wed Apr 17, 2013 11:34 am

Image

Image





gosh darn mailmen :?
seniorpesca
Pigpen
Pigpen
 
Posts: 125
Joined: Sat Mar 03, 2012 11:51 am

Re: TRM cab finish

Postby seniorpesca » Wed Apr 17, 2013 11:36 am

looks purty though Image
seniorpesca
Pigpen
Pigpen
 
Posts: 125
Joined: Sat Mar 03, 2012 11:51 am

Re: TRM cab finish

Postby Smolder » Wed Apr 17, 2013 11:43 am

Parallel is best as long as you can get the load of the speaker(s) to match the available outs from the amp. I have an amp wired in series in order to match the amps output impedance. The downside of series is that if one speaker blows, you have no sound at all. If you wire in parallel, the remaining speakers will still work, though with a different impedance (load).

As for finish, a stain will obviously color the wood and be a bit more forgiving of dirty hands moving it for practice and gigs. A sanding sealer with a finish coat of clear will do even more. I've never owned an HD cab, but my understanding is that isn't not hugely effecting the tone. It doesn't seem like they really count on a massive wood structure to provide huge bass response like a marshall 4x12 or others might.
Smolder
Senior Member
 
Posts: 631
Joined: Sun Jan 01, 2012 11:42 am
Location: 8152 feet... in the rockies.

Re: TRM cab finish

Postby Tennessee Jedi » Wed Apr 17, 2013 12:04 pm

Nice looking cab !
What kind of damage ? Corner/edge got dinged in shipping ?
You should post some of that killer jams your band does sometime - great stuff
:-)
User avatar
Tennessee Jedi
Senior Member
 
Posts: 4223
Joined: Mon Oct 08, 2007 6:29 am
Location: Bucks Co.Pa

Re: TRM cab finish

Postby seniorpesca » Wed Apr 17, 2013 1:03 pm

Tennessee Jedi wrote:Nice looking cab !
What kind of damage ? Corner/edge got dinged in shipping ?
You should post some of that killer jams your band does sometime - great stuff
:-)



yeah two corners got dinged up shipping. thanks man that last trio gig i did was alot of fun i will post it. I'm not sure which section of the forum though :-D
seniorpesca
Pigpen
Pigpen
 
Posts: 125
Joined: Sat Mar 03, 2012 11:51 am

Re: TRM cab finish

Postby Staemius » Wed Apr 17, 2013 1:13 pm

I like clear tung oil and polish with fine steel wool. Apply as many coats as you like (I usually do 4 to 6).
Staemius
Terrapin
Terrapin
 
Posts: 166
Joined: Mon Aug 17, 2009 7:43 pm

Re: TRM cab finish

Postby Tennessee Jedi » Wed Apr 17, 2013 1:20 pm

seniorpesca wrote:
Tennessee Jedi wrote:Nice looking cab !
What kind of damage ? Corner/edge got dinged in shipping ?
You should post some of that killer jams your band does sometime - great stuff
:-)



yeah two corners got dinged up shipping. thanks man that last trio gig i did was alot of fun i will post it. I'm not sure which section of the forum though :-D


Battle scars bro !

Post music here
viewforum.php?f=343

You guys have a great sound !
User avatar
Tennessee Jedi
Senior Member
 
Posts: 4223
Joined: Mon Oct 08, 2007 6:29 am
Location: Bucks Co.Pa

Re: TRM cab finish

Postby seniorpesca » Thu Apr 18, 2013 9:25 am

Tim is the man, amazing customer service which I had heard this numerous times before ordering the cab. He just said I could send it back and he would take care of it. Might just have him take care of the finish and add it to the tab :lol:
seniorpesca
Pigpen
Pigpen
 
Posts: 125
Joined: Sat Mar 03, 2012 11:51 am

Re: TRM cab finish

Postby rugger » Thu Apr 18, 2013 9:40 am

Honestly, I don't know if it's worth the time or energy sending it back. The cabs are inexpensive as it is and the corners will get dinged over time anyways. Unless of course there's some structural damage, then by all means, send it back.

I'm going to +1 the tung oil recommendation. It's easy to apply and looks great. You can find it at Home Depot.

I put rubber feet on mine, but that's just a preference thing. You can find those with a quick google search, or Mojotone maybe.

Enjoy.

john in san diego
rugger
Phil
Phil
 
Posts: 309
Joined: Fri Jan 22, 2010 10:24 am

Re: TRM cab finish

Postby Yankee Tim » Fri Apr 19, 2013 4:33 am

I used rattle can Minwax satin lacquer on my TRM and I'm very happy with the result.
Yankee Tim
Ice Cream!
Ice Cream!
 
Posts: 118
Joined: Tue May 08, 2012 10:50 am

Re: TRM cab finish

Postby Aquamauza » Mon Apr 22, 2013 7:09 am

I just bought this cab. Where did you get the speaker clips?
Aquamauza
welcome
welcome
 
Posts: 1
Joined: Mon Apr 22, 2013 7:06 am

Re: TRM cab finish

Postby seniorpesca » Tue Apr 23, 2013 11:16 am

Aquamauza wrote:I just bought this cab. Where did you get the speaker clips?

Ebay
seniorpesca
Pigpen
Pigpen
 
Posts: 125
Joined: Sat Mar 03, 2012 11:51 am

Re: TRM cab finish

Postby TI4-1009 » Tue Apr 23, 2013 12:18 pm

I used Lowe's "Tung Oil Finish" on my pine TRM cab, 5-6 coats. It's not a very hard, "protective" type of finish- like poly, but you can just add another coat when you want to. Just remember that the "tung oil" you get at the big box places isn't really pure tung oil, it's mostly solvent that dries off quickly leaving behind a little tung oil. You have to poke around to get the real full-strength tung oil.
"Do not write so that you can be understood, write so that you cannot be misunderstood." -Epictetus

First show: 8/16/69 (Woodstock)
Last show: 3/19/95 (Unbroken Chain breakout)
Member of the Four-Decade Club
Charter Member, President & CEO of OAD (Order of the Ancient Deadheads)
User avatar
TI4-1009
Senior Member
 
Posts: 1537
Joined: Fri Aug 20, 2010 6:27 am
Location: Upstate NY- Toodaloo

Next

Return to Cabinets

Who is online

Users browsing this forum: No registered users and 1 guest