Jbl e120 buzz

Re: Jbl e120 buzz

Postby cmc64 » Sun Feb 24, 2013 7:32 am

Great find on the JBL "repair" thread. Really good info. I did not know about that forum. I am not a Telecaster guy but who knows what other good info can be found out there. :smile:

I have had good luck with Philadelphia Sound Productions for repair work and sourcing of nice JBL D/K/E series speakers (plus a LOT of other good gear, new and used). Check them out right HERE. Their inventory changes frequently so check back often.
User avatar
cmc64
Billy
Billy
 
Posts: 245
Joined: Wed Apr 11, 2012 8:04 pm

Re: Jbl e120 buzz

Postby douglasa » Thu Feb 28, 2013 4:19 pm

If you are only using one 8 ohm speaker in your twin, try putting a 1 watt, 8 ohm resistor between the positive and negative connectors to bring it to a 4 ohm load. This will avoid possible damage to your amp or speaker because of a mismatched load.
douglasa
tiger
tiger
 
Posts: 21
Joined: Tue Jul 10, 2012 5:01 pm

Previous

Return to Loudspeakers

Who is online

Users browsing this forum: No registered users and 1 guest