Beyma Liberty 12" vs. Stock Twin Reverb

Beyma Liberty 12" vs. Stock Twin Reverb

Postby gr8fl4295 » Thu Apr 12, 2012 3:06 pm

Can someone explain, in layman's terms, what the big difference is, if any, from (alternative JBL e120) Beyma Liberty 12" speakers and the stock speakers that are in a '65 re-issue Twin Reverb amp (2-12" Jensen® C12K, 8 Ohm Speakers with Ceramic Magnets)?

Also, while we are on the subject of this re-issue amp, what else needs to be done to it to get a tastey Garcia tone?
Once in a while you get shown the light
In the strangest of places if you look at it right.
User avatar
gr8fl4295
Ice Cream!
Ice Cream!
 
Posts: 109
Joined: Tue Jan 10, 2012 9:14 pm
Location: Austin, Texas

Re: Beyma Liberty 12" vs. Stock Twin Reverb

Postby Smolder » Thu Apr 12, 2012 4:00 pm

Jensens typically break up sooner... That part of their charm. They also don't have he same crisp, dry delivery that the JBL's do. JBL's are otherwise a fairly neutral speaker. I know nothing about the Beyma's... Never had he pleasure of hearing or trying them.

The 65 reissue is a printed circuit board, which is not better or worse by design, but harder to work on. I've not worked on one of these, but some PSB's have very thin tracing (JTM30 fo instance) that is easy to screw up.

For specific of applying the standard mods to the RI this thread will get you started...

http://www.rukind.com/forum/viewtopic.php?f=309&t=8265
Last edited by Smolder on Sat Mar 09, 2013 7:30 am, edited 1 time in total.
Smolder
Senior Member
 
Posts: 618
Joined: Sun Jan 01, 2012 11:42 am
Location: 8152 feet... in the rockies.

Re: Beyma Liberty 12" vs. Stock Twin Reverb

Postby hippieguy1954 » Thu Apr 12, 2012 4:11 pm

Image
First show: 1973
Last show: 1994
User avatar
hippieguy1954
Senior Member
 
Posts: 1178
Joined: Thu Mar 24, 2011 1:29 pm
Location: Upstate, NY

Re: Beyma Liberty 12" vs. Stock Twin Reverb

Postby gr8fullfred » Thu Apr 12, 2012 4:11 pm

Here is the difference between the stock speakers in a vintage twin reverb and JBLs. I am not sure what speakers are in the TRRI.

In layman's terms:

The stock speakers in a Twin were basically POS (Piece Of Shit) speakers. Probably Jensens at the time. People seemed to like them, because they "broke up nice". Stamped sheet metal frames, relatively small magnets, smallish voice coils. El Cheapo.

JBLs on the hand (D120s, K120s, E120s, and pretty much any JBL speaker) are simply the best speakers ever made. Rigid cast metal frames, massive magnets, patented flat wound aluminum voice coils, and high quality materials and construction. All this cost mucho moola, but worth it.

Got it?
User avatar
gr8fullfred
Jerry
Jerry
 
Posts: 466
Joined: Mon Dec 21, 2009 7:29 pm


Return to Loudspeakers

Who is online

Users browsing this forum: No registered users and 1 guest